Van't Hoff Equation Calculator
Predict the equilibrium constant at a new temperature, find the temperature for a target K, or extract dH from two measurements.
📈 What is the Van't Hoff Equation?
The van't Hoff equation tells you how an equilibrium constant changes with temperature. Proposed by Jacobus van 't Hoff in 1884, it says that the slope of ln K against 1/T is minus the standard reaction enthalpy divided by the gas constant. A reaction that absorbs heat has a K that grows as the temperature rises, and a reaction that releases heat has a K that shrinks. That is Le Chatelier's principle written as a quantitative law.
Its uses are practical. A process chemist can estimate the equilibrium conversion of ammonia synthesis at a reactor temperature from a single tabulated value at 298 K. A biochemist can extract the enthalpy of protein folding or ligand binding from binding constants measured at several temperatures. A materials scientist can find the temperature at which a carbonate decomposes by asking where K reaches one. In each case, the equation turns a few measurements into a temperature map of the equilibrium.
Three common misunderstandings are worth clearing up. The equation concerns equilibrium constants, not rate constants, so it is not the Arrhenius equation even though the algebra looks alike. It uses the standard reaction enthalpy, and the integrated form assumes that enthalpy stays constant over the temperature range, which is an approximation. And a straight van't Hoff line says nothing about how fast equilibrium is reached, only where it ends up.
This calculator solves the integrated equation three ways: for K2 when you know the enthalpy, for the temperature T2 that gives a chosen K2, and for dH when you have two measurements. Each mode reports dG0 at the relevant temperatures and the entropy implied by K1, then draws the van't Hoff plot of ln K against 1000/T with your points marked, so you can see at a glance how steep the temperature dependence is.
📐 Formula
📖 How to Use This Calculator
Three modes
💡 Example Calculations
Example 1 - Ammonia equilibrium at 500 K
dH = -92.2 kJ/mol, K1 = 6.0e5 at 298.15 K (approximate), T2 = 500 K
Example 2 - Temperature at which limestone decomposes
dH = 178.3 kJ/mol, K1 = 1.4e-23 at 298.15 K (approximate), target K2 = 1
Example 3 - Enthalpy from two measurements
K1 = 0.001 at 300 K and K2 = 0.01 at 350 K (illustrative)
Example 4 - An endothermic dissociation heated to 350 K
N2O4 to 2 NO2: dH = 57.2 kJ/mol, K1 = 0.15 at 298.15 K (approximate), T2 = 350 K
❓ Frequently Asked Questions
📚 Sources and Notes
The integrated equation follows the Wikipedia article on the van 't Hoff equation and the LibreTexts chapter on the van 't Hoff equation. The equilibrium constants and enthalpies in the examples are rounded textbook-style values, approximate and illustrative, not measurements for your system.
See also the Gibbs free energy of reaction calculator, the Kirchhoff law calculator and the Arrhenius equation calculator.
🔗 Related Calculators
What is the van't Hoff equation?
The van't Hoff equation describes how the equilibrium constant K changes with temperature: d(ln K)/dT = dH0 / (R T^2). In its integrated form with a constant enthalpy, ln(K2/K1) = -(dH0/R)(1/T2 - 1/T1). It lets you predict K at a new temperature from K at a known one.
How do you calculate K2 at a new temperature?
Compute ln(K2/K1) = -(dH0 x 1000 / R)(1/T2 - 1/T1), then K2 = K1 x exp of that. For dH0 = -92.2 kJ/mol, K1 = 6.0 x 10^5 at 298.15 K and T2 = 500 K, ln(K2/K1) = -15.02, so K2 = 0.18.
What does the sign of dH0 tell you about K and temperature?
For an endothermic reaction (dH0 positive) K rises when the temperature rises, in line with Le Chatelier's principle. For an exothermic reaction (dH0 negative) K falls as the temperature rises, so heating shifts the equilibrium toward the reactants.
How do you make a van't Hoff plot?
Plot ln K against 1/T. The points fall on a straight line with slope -dH0/R and intercept dS0/R, as long as dH0 and dS0 are constant. The calculator draws this line with 1000/T on the axis so the numbers stay readable.
How do you find dH0 from two equilibrium constants?
Rearrange to dH0 = -R ln(K2/K1) / (1/T2 - 1/T1). With K1 = 0.001 at 300 K and K2 = 0.01 at 350 K, dH0 = +40.20 kJ/mol, so the reaction is endothermic.
How do you find the temperature for a target K?
Solve for T2: 1/T2 = 1/T1 - R ln(K2/K1) / dH0. For calcium carbonate with dH0 = 178.3 kJ/mol and K1 = 1.4 x 10^-23 at 298.15 K, reaching K2 = 1 needs T2 = 1,111.0 K.
Is the van't Hoff equation exact?
The differential form is exact. The integrated form assumes dH0 is constant between T1 and T2, which holds well over a modest range. Over a wide range dH0 changes with the heat capacity change according to Kirchhoff's law, and the plot of ln K against 1/T curves slightly.
How is the van't Hoff equation related to the Arrhenius equation?
They have the same mathematical form, but they describe different things. Van't Hoff gives the temperature dependence of an equilibrium constant using the reaction enthalpy dH0. Arrhenius gives the temperature dependence of a rate constant using the activation energy Ea.
What units must K and dH0 have?
K is the dimensionless thermodynamic equilibrium constant, dH0 is in kJ/mol and temperatures are in kelvin. Only the ratio K2/K1 matters for the integrated equation, so any consistent definition of K works, as long as K1 and K2 use the same one.
Why can there be no solution for T2?
Rearranging gives 1/T2 = 1/T1 - R ln(K2/K1)/dH0. If K changes by so much, in the direction the enthalpy cannot support, that the right-hand side becomes zero or negative, no positive temperature satisfies the equation. The calculator reports this instead of returning a nonsense value.
What is dS0 in this calculator?
It is the standard reaction entropy implied by K1 and dH0 at T1, found from dS0 = (dH0 - dG0) / T1 with dG0 = -RT1 ln K1. It is the intercept of the van't Hoff line multiplied by R, and it assumes dH0 and dS0 are constant.