Standard Enthalpy of Formation Calculator

Find the standard enthalpy change of a reaction from formation enthalpies, or back out an unknown formation enthalpy from a measured reaction.

🔥 Standard Enthalpy of Formation Calculator
Reactants (formation enthalpies in kJ/mol, approximate textbook values at 298.15 K)
Reactant 1
Coefficient
ΔH°f
kJ/mol
Reactant 2
Coefficient
ΔH°f
kJ/mol
Reactant 3
Coefficient
ΔH°f
kJ/mol
Products
Product 1
Coefficient
ΔH°f
kJ/mol
Product 2
Coefficient
ΔH°f
kJ/mol
Product 3
Coefficient
ΔH°f
kJ/mol
Amount of reaction (extent)
mol
Measured reaction enthalpy
kJ/mol
Unknown species coefficient
Unknown species is a
Reaction enthalpy (ΔH°)
—
In kcal/mol
—
Type
—
Sum over products
—
Sum over reactants
—
Total heat for the amount
—

Unknown ΔH°f
—
In kcal/mol
—
Unknown is a
—
Known product sum
—
Known reactant sum
—
Reaction enthalpy used
—

🔥 What is the Standard Enthalpy of Formation?

The standard enthalpy of formation, written ΔH°f and also called the standard heat of formation, is the enthalpy change when one mole of a compound is made from its elements, each in its standard reference state, at a pressure of 1 bar and usually a temperature of 298.15 K. Carbon dioxide, for example, forms from graphite and oxygen gas, C(graphite) + O2(g) → CO2(g), with ΔH°f = −393.5 kJ/mol. An element in its reference state has ΔH°f = 0 by definition, which fixes a common zero for the whole table of values.

The value of tabulated formation enthalpies is that they let you predict the heat of any reaction without running it. Because enthalpy is a state function, the standard enthalpy of a reaction is the sum of the formation enthalpies of the products minus the sum for the reactants, each multiplied by its stoichiometric coefficient. Chemists use this to find the heat released by fuels, to size reactors and heat exchangers, to judge whether a synthesis is exothermic enough to need cooling, and to check the energy balance in a laboratory problem set.

This calculator has two modes. The first computes the reaction enthalpy for up to three reactants and three products, taking values from a built-in list of about 25 common species or from your own custom numbers. The second runs the same equation backwards: if you have measured the enthalpy of a reaction, for instance the heat of combustion of ethanol, and you know the formation enthalpies of every other species, it solves for the one that is missing. That is how many formation enthalpies of organic compounds were first determined, since the elements often cannot be combined directly.

A few cautions apply. The state of matter changes the number, so liquid and gaseous water differ by the heat of vaporisation. The values here are approximate textbook figures, not a replacement for a critical data compilation. Finally, the standard conditions are 1 bar, not 1 atm, and the temperature is not part of the definition even though 298.15 K is the usual choice. This tool is different from the general enthalpy calculator and from the heat of combustion calculator because it works from formation data for arbitrary reactions. See also the Hess law calculator and the bond energy calculator.

📐 Formula

ΔH°rxn  =  Σ np ΔH°f(products)  −  Σ nr ΔH°f(reactants)
ΔH°rxn = standard enthalpy of reaction (kJ per mole of reaction as written)
n = stoichiometric coefficient of each species in the balanced equation
ΔH°f = standard enthalpy of formation (kJ/mol); zero for elements in their reference state
Unknown product: ΔH°f(x) = (ΔH°rxn − Σknown products + Σknown reactants) / nx
Unknown reactant: ΔH°f(x) = (Σknown products − Σknown reactants − ΔH°rxn) / nx
Example: CH4 + 2 O2 → CO2 + 2 H2O(l) gives −393.5 + 2(−285.8) − (−74.6) = −890.5 kJ/mol

📖 How to Use This Calculator

Two modes

1
Choose a mode - Pick Reaction enthalpy to compute delta H of a reaction, or Unknown formation enthalpy to solve for a missing delta H of formation from a measured reaction enthalpy.
2
Enter reactants and products - Select each species from the list or choose Custom, then enter its stoichiometric coefficient and formation enthalpy. Use a coefficient of 0 for rows you do not need.
3
Add the measured value if needed - In the unknown mode, enter the measured reaction enthalpy, the coefficient of the missing species and which side of the equation it is on.
4
Read the enthalpy and the table - Read the result in kJ/mol and kcal/mol with the exothermic or endothermic label, and check the contribution table to see each term of the sum.

💡 Example Calculations

Example 1 - Combustion of methane

CH4 + 2 O2 → CO2 + 2 H2O(l), values at 298.15 K (approximate textbook)

1
Products: 1 × (−393.5) + 2 × (−285.8) = −965.1 kJ.
2
Reactants: 1 × (−74.6) + 2 × 0 = −74.6 kJ.
3
ΔH = −965.1 − (−74.6) = −890.5 kJ/mol, or −212.83 kcal/mol.
ΔH° = −890.5 kJ/mol (exothermic)
Try this example →

Example 2 - Haber synthesis of ammonia

N2 + 3 H2 → 2 NH3

1
Both reactants are elements, so their sum is 0 kJ.
2
Products: 2 × (−45.9) = −91.8 kJ.
3
ΔH = −91.8 − 0 = −91.8 kJ per mole of reaction, which is −45.9 kJ per mole of NH3.
ΔH° = −91.8 kJ/mol (exothermic)
Try this example →

Example 3 - Thermite reaction

2 Al + Fe2O3 → Al2O3 + 2 Fe

1
Products: 1 × (−1675.7) + 2 × 0 = −1675.7 kJ.
2
Reactants: 2 × 0 + 1 × (−824.2) = −824.2 kJ.
3
ΔH = −1675.7 − (−824.2) = −851.5 kJ/mol. With 2 mol of reaction the heat is −1703.0 kJ.
ΔH° = −851.5 kJ/mol (very exothermic)
Try this example →

Example 4 - Formation enthalpy of ethanol from its combustion

C2H5OH(l) + 3 O2 → 2 CO2 + 3 H2O(l), measured ΔH = −1366.8 kJ/mol (illustrative)

1
Known products: 2 × (−393.5) + 3 × (−285.8) = −1644.4 kJ. Known reactants: 3 × 0 = 0 kJ.
2
Ethanol is a reactant, so ΔH°f(x) = (−1644.4 − 0 − (−1366.8)) / 1.
3
ΔH°f(ethanol) = −277.6 kJ/mol, matching the tabulated value.
ΔH°f(C2H5OH) = −277.6 kJ/mol
Try this example →

❓ Frequently Asked Questions

What is the standard enthalpy of formation?+
The standard enthalpy of formation is the enthalpy change when one mole of a compound forms from its elements in their standard reference states at 1 bar and, usually, 298.15 K. It is written as delta H degree f and is zero for an element in its reference state.
What is the formula for the enthalpy of reaction from enthalpies of formation?+
delta H rxn = sum of n x dHf for the products minus sum of n x dHf for the reactants, where n is each stoichiometric coefficient. The result is in kJ per mole of reaction as the equation is written.
How do you calculate the enthalpy of combustion of methane?+
For CH4 + 2 O2 -> CO2 + 2 H2O(l): dH = (-393.5) + 2(-285.8) - (-74.6) - 2(0) = -890.5 kJ/mol. The reaction releases about 890 kJ of heat per mole of methane burned.
Why is the enthalpy of formation of an element zero?+
Forming an element from itself involves no change, so by definition the enthalpy is zero for the most stable form at 1 bar and the stated temperature. This fixes a common zero for the whole table, which is why graphite is zero but diamond is not.
How do I find an unknown enthalpy of formation?+
Rearrange the same equation. For an unknown product, dHf(x) = (dH rxn - sum of known product terms + sum of known reactant terms) / n(x). For an unknown reactant, dHf(x) = (sum of known products - sum of known reactants - dH rxn) / n(x).
What does a negative enthalpy of formation mean?+
A negative value means heat is released when the compound forms from its elements, so the compound is lower in enthalpy than the elements. Examples are CO2 at -393.5 kJ/mol and NH3 at -45.9 kJ/mol. Positive values such as C2H2 at +227.4 kJ/mol mean energy is absorbed.
What is the difference between formation enthalpy and reaction enthalpy?+
Formation enthalpy refers to making one mole of a single compound from its elements. Reaction enthalpy refers to any balanced reaction and equals the sum of the formation enthalpies of products minus those of reactants, each weighted by its coefficient.
How accurate are the values in this table?+
They are rounded textbook values at 298.15 K, usually within a few tenths of a kJ/mol of NIST or CRC figures, though different sources differ slightly for compounds such as methanol and calcium carbonate. Use custom entries when you need a specific reference.
Does the temperature change the answer?+
Yes, formation enthalpies are tabulated at 298.15 K. At other temperatures the reaction enthalpy changes with the heat capacities of the species, which is described by the Kirchhoff relation. For small temperature differences the change is often a few kJ/mol.
How do I convert the result to kcal or total heat?+
Divide kJ by 4.184 to get kcal. For total heat multiply the per-mole reaction enthalpy by the moles of reaction. Burning 2 mol of methane releases 2 x 890.5 = 1781.0 kJ, which the amount field gives directly.

📚 Sources and Notes

The definition of the standard enthalpy of formation and its reference states follows the Wikipedia article on the standard enthalpy of formation and the LibreTexts chapter on standard enthalpies of formation. Critically evaluated values are available from the NIST Chemistry WebBook. The species values built into this tool are rounded textbook figures at 298.15 K, labelled approximate, and were not copied from a single web page. The measured combustion enthalpy of ethanol in Example 4 is illustrative.

See also the Gibbs free energy calculator and the lattice energy calculator.

What is the standard enthalpy of formation?

The standard enthalpy of formation is the enthalpy change when one mole of a compound forms from its elements in their standard reference states at 1 bar and, usually, 298.15 K. It is written as delta H degree f and is zero for an element in its reference state.

What is the formula for the enthalpy of reaction from enthalpies of formation?

delta H rxn = sum of n x dHf for the products minus sum of n x dHf for the reactants, where n is each stoichiometric coefficient. The result is in kJ per mole of reaction as the equation is written.

How do you calculate the enthalpy of combustion of methane?

For CH4 + 2 O2 -> CO2 + 2 H2O(l): dH = (-393.5) + 2(-285.8) - (-74.6) - 2(0) = -890.5 kJ/mol. The reaction releases about 890 kJ of heat per mole of methane burned.

Why is the enthalpy of formation of an element zero?

Forming an element from itself involves no change, so by definition the enthalpy is zero for the most stable form at 1 bar and the stated temperature. This fixes a common zero for the whole table, which is why graphite is zero but diamond is not.

How do I find an unknown enthalpy of formation?

Rearrange the same equation. For an unknown product, dHf(x) = (dH rxn - sum of known product terms + sum of known reactant terms) / n(x). For an unknown reactant, dHf(x) = (sum of known products - sum of known reactants - dH rxn) / n(x).

What does a negative enthalpy of formation mean?

A negative value means heat is released when the compound forms from its elements, so the compound is lower in enthalpy than the elements. Examples are CO2 at -393.5 kJ/mol and NH3 at -45.9 kJ/mol. Positive values such as C2H2 at +227.4 kJ/mol mean energy is absorbed.

What is the difference between formation enthalpy and reaction enthalpy?

Formation enthalpy refers to making one mole of a single compound from its elements. Reaction enthalpy refers to any balanced reaction and equals the sum of the formation enthalpies of products minus those of reactants, each weighted by its coefficient.

How accurate are the values in this table?

They are rounded textbook values at 298.15 K, usually within a few tenths of a kJ/mol of NIST or CRC figures, though different sources differ slightly for compounds such as methanol and calcium carbonate. Use custom entries when you need a specific reference.

Does the temperature change the answer?

Yes, formation enthalpies are tabulated at 298.15 K. At other temperatures the reaction enthalpy changes with the heat capacities of the species, which is described by the Kirchhoff relation. For small temperature differences the change is often a few kJ/mol.

How do I convert the result to kcal or total heat?

Divide kJ by 4.184 to get kcal. For total heat multiply the per-mole reaction enthalpy by the moles of reaction. Burning 2 mol of methane releases 2 x 890.5 = 1781.0 kJ, which the amount field gives directly.