Hess Law Reaction Enthalpy Calculator

Add reaction enthalpies with multipliers and reversals to get the enthalpy of a target reaction, or solve for a missing step.

🔁 Hess Law Reaction Enthalpy Calculator
Step 1
Reaction (label)
ΔH as written
kJ/mol
Multiplier
Direction
Step 2
Reaction (label)
ΔH as written
kJ/mol
Multiplier
Direction
Step 3
Reaction (label)
ΔH as written
kJ/mol
Multiplier
Direction
Step 4 (set multiplier to 0 if unused)
Reaction (label)
ΔH as written
kJ/mol
Multiplier
Direction

Target ΔH = sum of (multiplier × ΔH), with the sign flipped for each reversed step.

Target reaction enthalpy
kJ/mol
Unknown step
Target reaction ΔH
—
In kcal/mol
—
Type
—
Steps used
—
Steps reversed
—

Unknown step ΔH
—
In kcal/mol
—
Solved step
—
Target ΔH
—
Other steps sum
—
Factor of unknown
—

🔁 What is the Hess Law Reaction Enthalpy Calculator?

Hess's law states that the enthalpy change of a chemical reaction is the same whether it takes place in one step or in a sequence of steps. It was published by the Swiss-Russian chemist Germain Hess in 1840, and today it is understood as a direct consequence of enthalpy being a state function: the value depends only on where the system starts and where it ends, not on the path in between. The practical power of the law is that it lets you find the enthalpy of a reaction that is hard or impossible to measure directly by adding up the enthalpies of reactions that can be measured.

The standard textbook example is the formation of methane from carbon and hydrogen. The reaction C + 2 H2 → CH4 does not go cleanly in a calorimeter, but the combustion of carbon, hydrogen and methane are all easy to measure. Add the first two, reverse the third, and the heats combine to give −74.8 kJ/mol. Chemists use the same method for strained or unstable molecules, for allotropes such as graphite and diamond, for the lattice energy of ionic solids through the Born-Haber cycle, and for checking the consistency of published thermochemical data.

This calculator handles the bookkeeping. You enter up to four known reactions with their enthalpies as written, choose a multiplier and a direction for each, and the tool adds the contributions into the target enthalpy. A reversed step has its sign flipped, and a multiplier scales the enthalpy, so you only have to decide how the equations combine. In the second mode you enter the target enthalpy and name the one step that is unknown, and the tool returns the missing value. A table lists each step, its factor, its contribution and the running total so you can check the arithmetic.

It is different from the standard enthalpy of formation calculator, which looks up formation values of species and sums products minus reactants. Hess's law is the more general idea, because the steps can be any reactions at all. Remember that every step must be at the same temperature and pressure, that the states of matter must match, and that the step enthalpies are your inputs, so the result is only as accurate as the data. For bond-based estimates see the bond energy calculator.

📐 Formula

ΔHtarget  =  Σ si mi ΔHi
ΔHtarget = enthalpy of the target reaction (kJ per mole of target as written)
ΔHi = enthalpy of step i as written (kJ/mol)
mi = multiplier needed to match coefficients (0 leaves the step out)
si = +1 if the step is used as written, −1 if it is reversed
Solve for a step: ΔHx = (ΔHtarget − Σothers si mi ΔHi) / (sx mx)
Example: −393.5 + 2(−285.8) + (−1)(−890.3) = −74.8 kJ/mol

📖 How to Use This Calculator

Two modes

1
Enter the known steps - For each step, type the reaction name, its enthalpy in kJ/mol as written, a multiplier, and whether it is used as written or reversed. Set the multiplier to 0 for unused steps.
2
Choose combine or solve - Use Combine steps to add the contributions into a target enthalpy, or Solve for a step to enter the target enthalpy and find the one unknown step.
3
Check the table - Read the target or unknown enthalpy in kJ/mol and kcal/mol, then check the step table and running total to confirm each contribution.

💡 Example Calculations

Example 1 - Formation of methane from combustion data

Target: C + 2 H2 → CH4, from three combustion enthalpies (textbook values, illustrative)

1
Step 1 as written: 1 × (−393.5) = −393.5 kJ. Step 2 doubled: 2 × (−285.8) = −571.6 kJ.
2
Step 3 reversed: −1 × (−890.3) = +890.3 kJ.
3
Sum: −393.5 − 571.6 + 890.3 = −74.8 kJ/mol, or −17.88 kcal/mol.
ΔH = −74.8 kJ/mol (exothermic)
Try this example →

Example 2 - Graphite to diamond

Target: C(graphite) → C(diamond), from two combustion enthalpies (illustrative textbook values)

1
Burning graphite: 1 × (−393.5) = −393.5 kJ.
2
Burning diamond, reversed: −1 × (−395.4) = +395.4 kJ.
3
Sum: −393.5 + 395.4 = +1.9 kJ/mol, so the conversion is slightly endothermic.
ΔH = +1.9 kJ/mol (endothermic)
Try this example →

Example 3 - Nitrogen dioxide from nitrogen and oxygen

Target: N2 + 2 O2 → 2 NO2, from two steps (illustrative textbook values)

1
Step 1, N2 + O2 → 2 NO: +180.5 kJ with multiplier 1.
2
Step 2, 2 NO + O2 → 2 NO2: −114.1 kJ with multiplier 1.
3
Sum: 180.5 − 114.1 = +66.4 kJ/mol, or +15.87 kcal/mol; the NO cancels in the sum.
ΔH = +66.4 kJ/mol (endothermic)
Try this example →

Example 4 - Solve for a missing step

Target +66.4 kJ/mol, step 1 = +180.5 kJ/mol known, step 2 unknown

1
The known contribution is 1 × 180.5 = 180.5 kJ.
2
The unknown step has factor +1, so ΔH2 = (66.4 − 180.5) / 1.
3
ΔH2 = −114.1 kJ/mol, or −27.27 kcal/mol.
Step 2 ΔH = −114.1 kJ/mol
Try this example →

❓ Frequently Asked Questions

What is Hess's law?+
Hess's law says the total enthalpy change of a reaction is the same whether it happens in one step or in several, because enthalpy is a state function. You can therefore add the enthalpies of known reactions to find the enthalpy of a reaction that cannot be measured directly.
How do you apply Hess's law step by step?+
Write the target equation, arrange the given equations so they add up to it by reversing or multiplying them, change the enthalpies in the same way, and add them. Species that appear on both sides of the combined equation cancel out.
What happens to the enthalpy when you reverse a reaction?+
The sign changes. If C + O2 -> CO2 has delta H = -393.5 kJ/mol, then CO2 -> C + O2 has delta H = +393.5 kJ/mol. The magnitude is identical because the same states are connected in the opposite direction.
What happens to the enthalpy when you multiply a reaction?+
The enthalpy is multiplied by the same factor. Doubling every coefficient doubles the amount of material reacting, so it doubles the heat. A multiplier of 0.5 gives half the heat for half the reaction.
How do you calculate the formation enthalpy of methane from combustion data?+
Take C + O2 -> CO2 (-393.5 kJ), 2 x (H2 + 1/2 O2 -> H2O) (2 x -285.8 kJ), and the reverse of CH4 + 2 O2 -> CO2 + 2 H2O (+890.3 kJ). The sum is -393.5 - 571.6 + 890.3 = -74.8 kJ/mol for C + 2 H2 -> CH4.
Can the calculator find a missing step?+
Yes. Choose the Solve for a step mode, enter the target enthalpy, and select which step is unknown. The calculator returns (target - sum of the other contributions) divided by the factor of that step.
How is Hess's law different from using enthalpies of formation?+
Using formation enthalpies is a special case of Hess's law where every step is the formation of a species from its elements. Hess's law is more general: the steps can be any reactions, such as combustions or phase changes, as long as they combine to the target.
Why does Hess's law work?+
Enthalpy depends only on the initial and final states, not on the path. Any sequence of steps that starts at the same reactants and ends at the same products must therefore have the same total enthalpy change, which follows from conservation of energy.
Does Hess's law apply to entropy and Gibbs energy?+
Yes, the same additivity holds for any state function, including entropy, Gibbs energy and internal energy. You can add delta G values of steps in exactly the same way, with the same sign flips for reversed steps and the same multipliers.
What are common mistakes when using Hess's law?+
The usual errors are forgetting to flip the sign when reversing, forgetting to multiply the enthalpy when scaling the equation, mixing states such as H2O(l) and H2O(g), and using data taken at different temperatures. Check that every species cancels in the sum.

📚 Sources and Notes

The statement of Hess's law and its link to enthalpy as a state function follow the Wikipedia article on Hess's law and the Shasta College LibreTexts page on Hess's law. The step enthalpies in the examples (carbon, hydrogen and methane combustion, graphite and diamond, and the nitrogen oxides) are rounded textbook values included for illustration and were not copied from a single web page; replace them with data from your own source.

See also the standard enthalpy of formation calculator and the enthalpy calculator.

What is Hess's law?

Hess's law says the total enthalpy change of a reaction is the same whether it happens in one step or in several, because enthalpy is a state function. You can therefore add the enthalpies of known reactions to find the enthalpy of a reaction that cannot be measured directly.

How do you apply Hess's law step by step?

Write the target equation, arrange the given equations so they add up to it by reversing or multiplying them, change the enthalpies in the same way, and add them. Species that appear on both sides of the combined equation cancel out.

What happens to the enthalpy when you reverse a reaction?

The sign changes. If C + O2 -> CO2 has delta H = -393.5 kJ/mol, then CO2 -> C + O2 has delta H = +393.5 kJ/mol. The magnitude is identical because the same states are connected in the opposite direction.

What happens to the enthalpy when you multiply a reaction?

The enthalpy is multiplied by the same factor. Doubling every coefficient doubles the amount of material reacting, so it doubles the heat. A multiplier of 0.5 gives half the heat for half the reaction.

How do you calculate the formation enthalpy of methane from combustion data?

Take C + O2 -> CO2 (-393.5 kJ), 2 x (H2 + 1/2 O2 -> H2O) (2 x -285.8 kJ), and the reverse of CH4 + 2 O2 -> CO2 + 2 H2O (+890.3 kJ). The sum is -393.5 - 571.6 + 890.3 = -74.8 kJ/mol for C + 2 H2 -> CH4.

Can the calculator find a missing step?

Yes. Choose the Solve for a step mode, enter the target enthalpy, and select which step is unknown. The calculator returns (target - sum of the other contributions) divided by the factor of that step.

How is Hess's law different from using enthalpies of formation?

Using formation enthalpies is a special case of Hess's law where every step is the formation of a species from its elements. Hess's law is more general: the steps can be any reactions, such as combustions or phase changes, as long as they combine to the target.

Why does Hess's law work?

Enthalpy depends only on the initial and final states, not on the path. Any sequence of steps that starts at the same reactants and ends at the same products must therefore have the same total enthalpy change, which follows from conservation of energy.

Does Hess's law apply to entropy and Gibbs energy?

Yes, the same additivity holds for any state function, including entropy, Gibbs energy and internal energy. You can add delta G values of steps in exactly the same way, with the same sign flips for reversed steps and the same multipliers.

What are common mistakes when using Hess's law?

The usual errors are forgetting to flip the sign when reversing, forgetting to multiply the enthalpy when scaling the equation, mixing states such as H2O(l) and H2O(g), and using data taken at different temperatures. Check that every species cancels in the sum.