Bond Dissociation Energy Calculator

Estimate a reaction enthalpy from average bond energies, or work out an average bond energy and the photon wavelength that breaks it.

🔗 Bond Dissociation Energy Calculator
Bonds broken in the reactants (approximate average bond energies)
Broken 1
Count
Energy
kJ/mol
Broken 2
Count
Energy
kJ/mol
Broken 3
Count
Energy
kJ/mol
Broken 4
Count
Energy
kJ/mol
Bonds formed in the products
Formed 1
Count
Energy
kJ/mol
Formed 2
Count
Energy
kJ/mol
Formed 3
Count
Energy
kJ/mol
Formed 4
Count
Energy
kJ/mol
Atomisation enthalpy (all bonds broken, illustrative)
kJ/mol
Number of equivalent bonds
Estimated ΔH (approximate)
—
In kcal/mol
—
Type
—
Energy to break bonds
—
Energy released forming bonds
—
Bond count
—

Average bond energy
—
In kcal/mol
—
Per bond in eV
—
Per bond in joules
—
Photon wavelength
—
Spectral region
—

🔗 What is Bond Dissociation Energy?

Bond dissociation energy is the amount of energy needed to break one mole of a specific chemical bond in the gas phase so that each atom or fragment keeps one electron of the shared pair. It is always positive, because holding atoms together lowers the energy and pulling them apart must put it back. A large value means a strong bond: the triple bond in nitrogen, N≡N, needs about 941 kJ/mol, which explains why nitrogen gas is so inert, while the single bond in iodine, I-I, needs only about 149 kJ/mol. The related term bond energy usually means an average over many molecules, which is what textbook tables list.

Because breaking bonds absorbs energy and forming bonds releases it, the bond energies of the reactants and products give a quick estimate of the enthalpy of a gas-phase reaction: ΔH is approximately the sum of the energies of the bonds broken minus the sum of the energies of the bonds formed. Students use the method to see why combustion is exothermic, chemists use it to compare the strength of competing reaction pathways, and engineers use it for a first estimate when no formation data exist. The calculator below does the bookkeeping for up to four bond types broken and four formed, with a table of 34 average bond energies you can pick from or override.

The second mode goes the other way. If you know the total enthalpy needed to pull a molecule apart into atoms (its atomisation enthalpy) and how many equivalent bonds it has, dividing gives the average bond energy. The tool also converts the result into electronvolts per bond, joules per bond, and the wavelength of the photon that carries the same energy, using λ = h c NA / D. This explains, for example, why the 239 kJ/mol Cl-Cl bond can be split by visible light near 500 nm and why C-H bonds at about 415 kJ/mol need ultraviolet light.

Keep the limits in mind. The values are approximate averages, so the answer is an estimate: for methane combustion the bond method gives −824 kJ/mol, while the measured value with water vapour as the product is about −802 kJ/mol. The method ignores resonance, ring strain and intermolecular forces, and it does not include phase changes. For accurate work use the standard enthalpy of formation calculator or the Hess law calculator. To see how many bonds join two atoms, try the bond order calculator.

📐 Formula

ΔH  ≈  Σ nb Db (bonds broken)  −  Σ nf Df (bonds formed)
ΔH = estimated reaction enthalpy (kJ per mole of reaction as written); negative is exothermic
D = average bond energy of a bond type (kJ/mol), approximate table values
n = number of bonds of that type broken or formed per mole of reaction
Average bond energy: Davg = ΔHatomisation / nbonds
Photon wavelength: λ = h c NA / D, which is 119,627 / D nm when D is in kJ/mol
Example: CH4 + 2 O2 → CO2 + 2 H2O gives 4(413) + 2(495) − 2(799) − 4(467) = −824 kJ/mol

📖 How to Use This Calculator

Two modes

1
Choose a mode - Pick Reaction from bonds to estimate a reaction enthalpy, or Average bond energy to divide an atomisation enthalpy by the number of equivalent bonds.
2
List the bonds - For each bond type broken in the reactants and formed in the products, select the bond from the list or choose Custom, then enter how many of that bond change.
3
Read the estimate - Read the approximate enthalpy in kJ/mol and kcal/mol with the exothermic or endothermic label, and check the table for each bond contribution.
4
Compare with data - Compare your estimate with a measured enthalpy of formation result to see how far the average bond energies are from the real value.

💡 Example Calculations

Example 1 - Combustion of methane

CH4 + 2 O2 → CO2 + 2 H2O (approximate textbook bond energies)

1
Bonds broken: 4 C-H × 413 = 1652 kJ and 2 O=O × 495 = 990 kJ, total 2642 kJ.
2
Bonds formed: 2 C=O (in CO2) × 799 = 1598 kJ and 4 O-H × 467 = 1868 kJ, total 3466 kJ.
3
ΔH ≈ 2642 − 3466 = −824 kJ/mol, or −196.9 kcal/mol, compared with about −802 kJ/mol measured for water vapour.
ΔH ≈ −824 kJ/mol (exothermic, approximate)
Try this example →

Example 2 - Hydrogen and chlorine

H2 + Cl2 → 2 HCl

1
Bonds broken: 1 H-H (432) + 1 Cl-Cl (239) = 671 kJ.
2
Bonds formed: 2 H-Cl × 427 = 854 kJ.
3
ΔH ≈ 671 − 854 = −183 kJ/mol, close to the measured value near −184.6 kJ/mol.
ΔH ≈ −183 kJ/mol (exothermic)
Try this example →

Example 3 - Hydrogenation of ethene

C2H4 + H2 → C2H6 (net bonds that change)

1
Bonds broken: 1 C=C (614) + 1 H-H (432) = 1046 kJ.
2
Bonds formed: 1 C-C (347) + 2 C-H (2 × 413 = 826) = 1173 kJ.
3
ΔH ≈ 1046 − 1173 = −127 kJ/mol, a little less negative than the measured value near −136 kJ/mol.
ΔH ≈ −127 kJ/mol (exothermic, approximate)
Try this example →

Example 4 - Average C-H bond energy in methane

Atomisation enthalpy 1662 kJ/mol (illustrative), 4 equivalent C-H bonds

1
Davg = 1662 / 4 = 415.5 kJ/mol, which is 99.3 kcal/mol.
2
Per bond this is 415.5 / 96.485 = 4.306 eV, or 6.900×10−19 J.
3
The photon wavelength is 119,627 / 415.5 = 287.9 nm, in the ultraviolet.
Davg = 415.5 kJ/mol, λ = 287.9 nm
Try this example →

❓ Frequently Asked Questions

What is bond dissociation energy?+
Bond dissociation energy is the enthalpy needed to break one mole of a particular bond homolytically in the gas phase, giving two radical fragments. It is always positive because breaking bonds absorbs energy, and it is a measure of bond strength.
What is the difference between bond dissociation energy and average bond energy?+
A bond dissociation energy is for one specific bond in a specific molecule, such as the first C-H bond in methane. An average bond energy is the mean over many molecules or over all equivalent bonds, such as 413 kJ/mol for a typical C-H bond.
How do you calculate reaction enthalpy from bond energies?+
Add up the energies of all bonds broken in the reactants and subtract the energies of all bonds formed in the products: delta H = sum D(broken) - sum D(formed). A negative result means more energy is released forming new bonds than is spent breaking old ones.
How do you estimate the enthalpy of combustion of methane from bond energies?+
CH4 + 2 O2 -> CO2 + 2 H2O breaks 4 C-H (1652 kJ) and 2 O=O (990 kJ), total 2642 kJ, and forms 2 C=O (1598 kJ) and 4 O-H (1868 kJ), total 3466 kJ. So delta H = 2642 - 3466 = -824 kJ/mol.
Why does the bond method differ from measured values?+
Tabulated energies are averages, but real bond strengths depend on the neighbouring atoms. The error also includes the energy of resonance, strain and the physical state. Differences of 10 to 50 kJ/mol between the estimate and a measured value are common.
How do you find an average bond energy from atomisation enthalpy?+
Divide the enthalpy of breaking all the bonds, the atomisation enthalpy, by the number of equivalent bonds. For methane, 1662 kJ/mol over 4 C-H bonds gives 415.5 kJ/mol, a little above the 413 kJ/mol table value because of rounding.
What wavelength of light can break a bond?+
The photon energy must be at least the bond energy per molecule, so lambda = h c N_A / D. For Cl-Cl at 239 kJ/mol the wavelength is 500.5 nm, which is why chlorine can be split by visible and ultraviolet light.
Is a higher bond energy a stronger bond?+
Yes. N#N at 941 kJ/mol is among the strongest, which is why nitrogen is so unreactive, while I-I at 149 kJ/mol is weak. Triple bonds are stronger than double bonds, which are stronger than single bonds between the same atoms.
Can bond energies give an exact answer?+
No. They are intended for quick estimates and teaching, and they are best used on gas-phase reactions of small molecules. For accurate values use standard enthalpies of formation or the Hess's law approach with measured data.
How do I convert between kJ/mol, kcal/mol and eV?+
Divide kJ/mol by 4.184 to get kcal/mol, and divide kJ/mol by 96.485 to get electronvolts per bond. For example 432 kJ/mol for H-H is 103.3 kcal/mol or 4.477 eV per molecule.

📚 Sources and Notes

The distinction between a bond dissociation energy and an average bond energy follows the Wikipedia article on bond-dissociation energy. Tables of average bond energies are published on the LibreTexts bond energies page and by Michigan State University, and values differ slightly between sources and units. The bond energies built into this tool are rounded textbook averages in kJ/mol, labelled approximate, and were not copied from one page. The atomisation enthalpy in Example 4 is illustrative. Measured comparison values quoted in the examples are approximate.

See also the enthalpy calculator and the lattice energy calculator.

What is bond dissociation energy?

Bond dissociation energy is the enthalpy needed to break one mole of a particular bond homolytically in the gas phase, giving two radical fragments. It is always positive because breaking bonds absorbs energy, and it is a measure of bond strength.

What is the difference between bond dissociation energy and average bond energy?

A bond dissociation energy is for one specific bond in a specific molecule, such as the first C-H bond in methane. An average bond energy is the mean over many molecules or over all equivalent bonds, such as 413 kJ/mol for a typical C-H bond.

How do you calculate reaction enthalpy from bond energies?

Add up the energies of all bonds broken in the reactants and subtract the energies of all bonds formed in the products: delta H = sum D(broken) - sum D(formed). A negative result means more energy is released forming new bonds than is spent breaking old ones.

How do you estimate the enthalpy of combustion of methane from bond energies?

CH4 + 2 O2 -> CO2 + 2 H2O breaks 4 C-H (1652 kJ) and 2 O=O (990 kJ), total 2642 kJ, and forms 2 C=O (1598 kJ) and 4 O-H (1868 kJ), total 3466 kJ. So delta H = 2642 - 3466 = -824 kJ/mol.

Why does the bond method differ from measured values?

Tabulated energies are averages, but real bond strengths depend on the neighbouring atoms. The error also includes the energy of resonance, strain and the physical state. Differences of 10 to 50 kJ/mol between the estimate and a measured value are common.

How do you find an average bond energy from atomisation enthalpy?

Divide the enthalpy of breaking all the bonds, the atomisation enthalpy, by the number of equivalent bonds. For methane, 1662 kJ/mol over 4 C-H bonds gives 415.5 kJ/mol, a little above the 413 kJ/mol table value because of rounding.

What wavelength of light can break a bond?

The photon energy must be at least the bond energy per molecule, so lambda = h c N_A / D. For Cl-Cl at 239 kJ/mol the wavelength is 500.5 nm, which is why chlorine can be split by visible and ultraviolet light.

Is a higher bond energy a stronger bond?

Yes. N#N at 941 kJ/mol is among the strongest, which is why nitrogen is so unreactive, while I-I at 149 kJ/mol is weak. Triple bonds are stronger than double bonds, which are stronger than single bonds between the same atoms.

Can bond energies give an exact answer?

No. They are intended for quick estimates and teaching, and they are best used on gas-phase reactions of small molecules. For accurate values use standard enthalpies of formation or the Hess's law approach with measured data.

How do I convert between kJ/mol, kcal/mol and eV?

Divide kJ/mol by 4.184 to get kcal/mol, and divide kJ/mol by 96.485 to get electronvolts per bond. For example 432 kJ/mol for H-H is 103.3 kcal/mol or 4.477 eV per molecule.