Radius of Gyration Calculator
Find the radius of gyration of an ideal chain, ring, rod, sphere or worm-like chain, or estimate Rg from molar mass with a scaling law.
🧬 What is the Radius of Gyration?
The radius of gyration, written Rg, is the standard size measure for a polymer molecule. It is defined as the root mean square distance of all the chain segments from the centre of mass of the chain. A tightly packed particle has a small Rg and a stretched or swollen chain has a large one. Because a flexible polymer wriggles through an enormous number of conformations, Rg is always an average over those conformations, so the quantity that is actually computed is the mean square value Rg2.
Rg is popular because an experiment can measure it directly. Static light scattering and small-angle X-ray or neutron scattering both report the radius of gyration of the scatterers, and it is well defined even for rings, stars and branched molecules that have no two ends to measure between. Polymer scientists use it to compare molecular weights, to judge solvent quality from how Rg scales with chain length, to find the overlap concentration where coils begin to touch, and to check whether a chain will fit inside a pore or between nanoparticles.
For an ideal chain of N segments of length b the result is simple: Rg2 = N b2 / 6. The mean square end-to-end distance is N b2, so Rg is the end-to-end distance divided by the square root of 6, about 41 percent of it. Other architectures change the numerical factor but not the idea. An ideal ring has half the mean square size of the matching linear chain, a rigid rod has Rg = L/√12 and grows linearly with length, and a uniform solid sphere has Rg = √(3/5) R. Semiflexible polymers such as DNA sit between the rod and coil limits, and the Benoit-Doty worm-like chain formula gives the full crossover.
A common misconception is that Rg is the same as the hydrodynamic radius. They are different quantities. Rh is the radius of a hard sphere that diffuses at the same rate as the molecule, while Rg is a purely geometric average. For a hard sphere Rg/Rh is 0.775, for flexible coils it is near 1.5, and for rods it rises further, so comparing the two is a fast way to learn the shape. This calculator covers all three situations: shapes built from segments, the worm-like chain, and the empirical scaling law Rg = K Mν used to extrapolate from a measured molar mass. Each mode ends with a chart so you can see how the size changes around your chosen point. Related tools: chain end-to-end distance and Flory exponent scaling.
📐 Formula
📖 How to Use This Calculator
Three modes
💡 Example Calculations
Example 1 - Ideal chain of 1000 segments
N = 1000 segments, b = 0.5 nm, ideal linear chain
Example 2 - Double-stranded DNA as a worm-like chain
L = 1000 nm, P = 50 nm (illustrative persistence length)
Example 3 - Rg from molar mass in a good solvent
K = 0.012 nm (illustrative), ν = 0.588, M = 100,000 g/mol
Example 4 - A solid sphere for comparison
Uniform sphere of radius R = 5 nm
❓ Frequently Asked Questions
📚 Sources and Notes
Definitions and the ideal-chain relation Rg2 = R2/6 follow the Wikipedia article on the radius of gyration and the Yale polymer physics lecture notes. The Benoit-Doty expression is written as commonly quoted in polymer textbooks; the default prefactor K and the Rg/Rh value of 1.5 are illustrative and should be replaced by values measured for your system.
See also the polymer physics calculators and the DNA persistence length calculator.
🔗 Related Calculators
What is the radius of gyration of a polymer?
The radius of gyration Rg is the root mean square distance of the chain segments from the centre of mass. For a polymer it is averaged over all conformations, so Rg^2 is the mean of the squared distances, and it is the size measure that light scattering gives directly.
What is the formula for the radius of gyration of an ideal chain?
For an ideal chain of N segments of length b, Rg^2 = N b^2 / 6, so Rg = b sqrt(N/6). Because the mean square end-to-end distance is N b^2, Rg^2 = R^2 / 6 and Rg is about 0.408 times the rms end-to-end distance R.
How do you find Rg for 1000 segments of length 0.5 nm?
Rg = 0.5 x sqrt(1000/6) = 0.5 x 12.91 = 6.455 nm. The rms end-to-end distance is 0.5 x sqrt(1000) = 15.81 nm, and the fully stretched contour length is 500 nm.
What is the radius of gyration of a sphere or a rod?
A uniform solid sphere of radius R has Rg = sqrt(3/5) R = 0.775 R. A thin rigid rod of length L has Rg = L / sqrt(12) = 0.289 L. A ring polymer has half the mean square Rg of the linear chain, Rg^2 = N b^2 / 12.
What is the Benoit-Doty formula for a worm-like chain?
Rg^2 = L P / 3 - P^2 + 2 P^3 / L - (2 P^4 / L^2)(1 - exp(-L/P)) for contour length L and persistence length P. It tends to L^2/12 for short chains (rod) and to L P / 3 for long chains (Gaussian coil with Kuhn length 2P).
How does Rg scale with molecular weight?
Rg = K M^nu. The exponent nu is about 0.588 in a good solvent, 0.5 in a theta solvent and 1/3 for a collapsed globule. Doubling the molar mass therefore raises Rg by 2^0.588 = 1.50 in a good solvent but only 1.41 at the theta point.
What is the difference between Rg and the hydrodynamic radius Rh?
Rg is a geometric size from scattering, Rh is the radius of a hard sphere that diffuses at the same rate. For a hard sphere Rg/Rh = 0.775, while flexible coils give a ratio of roughly 1.5, so the ratio helps distinguish compact particles from coils.
Is the radius of gyration the same as the end-to-end distance?
No. For a Gaussian chain Rg = R / sqrt(6), so the end-to-end distance is about 2.45 times larger. Rg is also well defined for rings and branched molecules that have no ends, which is one reason scattering experiments report it.
Why does the radius of gyration matter?
Rg sets the size of a polymer in solution, which controls overlap concentration, viscosity, filtration and confinement behaviour, and how a chain fits into pores or between nanoparticles. It is also the length scale at which static light scattering and small-angle scattering probe the chain.
How do I get Rg for DNA or another stiff polymer?
Use the worm-like chain mode with the persistence length, about 50 nm for double-stranded DNA under typical salt. For L = 1000 nm and P = 50 nm the calculator gives Rg = 120 nm, well below the 289 nm rod value and close to the coil limit of 129 nm.