Glass Transition Temperature Estimator (Fox Equation)
Predict the glass transition of a polymer blend, copolymer or plasticized polymer, or find the composition that reaches a target Tg.
🌡️ What is the Fox Equation?
The Fox equation is a simple mixing rule that predicts the glass transition temperature, Tg, of a miscible polymer blend, a random copolymer, or a polymer containing a plasticizer. The glass transition is the temperature range in which a polymer changes from a hard, glassy solid to a soft, rubbery material. Because it controls whether a plastic is brittle or flexible at room temperature, Tg is one of the most important numbers in polymer formulation. The Fox equation says that the reciprocal of the blend Tg is the mass-weighted sum of the reciprocal Tg values of the components, with every temperature in kelvin.
Engineers use it in many routine jobs. Coatings and adhesive chemists choose monomer ratios, such as hard and soft acrylates, to hit a target Tg for film formation. Packaging and vinyl producers estimate how much plasticizer is needed to make rigid PVC flexible. Pharmaceutical scientists predict how absorbed water or an excipient lowers the Tg of an amorphous solid. Because the equation takes only two glass transition temperatures and a composition, it is a fast first guess before anything is measured.
Several things are worth knowing. The result always lies between the two pure-component values and is slightly below the plain mass average because a harmonic mean cannot exceed an arithmetic mean. The equation uses mass fractions, so a mole-based recipe must be converted with the repeat-unit molar masses. It assumes the components mix at the molecular level; an immiscible blend shows two separate Tg values, not one. Specific interactions, sequence distribution and chain-length effects can all push real data above or below the prediction, which is why the Gordon-Taylor equation, with its fitted parameter K, is widely used as a more flexible alternative. When K equals the ratio Tg1/Tg2, Gordon-Taylor reduces exactly to Fox.
This estimator has two modes. Tg from composition runs the equation forward from a mass or mole fraction and shows the Fox, Gordon-Taylor and mass-average results together with a chart of the full composition range. Composition for target Tg runs it backwards to find how much of each component gives the Tg you want, for example a plasticized PVC at room temperature. The preset Tg values are illustrative magnitudes, not certified data. For how a polymer's flow responds above Tg see the WLF viscosity calculator, and for mixing thermodynamics see the Flory-Huggins calculator.
📐 Formula
📖 How to Use This Calculator
Estimating Tg
💡 Example Calculations
Example 1 - Plasticized PVC
70 percent PVC (Tg 354 K) and 30 percent plasticizer (Tg 200 K), illustrative values
Example 2 - Styrene and methyl methacrylate copolymer by mole fraction
x1 = 0.5 styrene (373 K, 104.15 g/mol) and 0.5 MMA units (378 K, 100.12 g/mol)
Example 3 - Plasticizer needed to reach 293 K
Target Tg = 293 K (about 20 degrees Celsius), PVC 354 K, plasticizer 200 K
Example 4 - A wide Tg gap between the components
50 percent polystyrene (373 K) and 50 percent polyethylene-like component (153 K), illustrative
❓ Frequently Asked Questions
📚 Sources and Notes
The Fox form 1/Tg = Σ wi/Tgi is documented on the Fox equation reference page, and the Gordon-Taylor comparison on the Wolfram Demonstrations Project. The glass transition temperatures in the presets and the Gordon-Taylor K of 1.5 are illustrative, not certified reference values, so use data measured for your own materials.
See also the polymer physics calculators.
🔗 Related Calculators
What is the Fox equation for glass transition temperature?
The Fox equation is 1/Tg = w1/Tg1 + w2/Tg2, where w are mass fractions and Tg are in kelvin. It predicts the single Tg of a miscible blend or random copolymer from the Tg of the pure components.
How do you calculate the Tg of a copolymer with the Fox equation?
Convert each Tg to kelvin and use the mass fraction of each monomer unit. For 70 percent of a polymer with Tg 354 K and 30 percent of a component with Tg 200 K: 1/Tg = 0.7/354 + 0.3/200 = 0.003477, so Tg = 287.6 K or 14.4 degrees Celsius.
Do I use mass fraction or mole fraction in the Fox equation?
Mass fraction. If you have mole fractions, convert with w1 = x1 M1 / (x1 M1 + x2 M2) using repeat-unit molar masses. This calculator does the conversion when you choose the mole basis.
What is the Gordon-Taylor equation?
Gordon-Taylor gives Tg = (w1 Tg1 + K w2 Tg2) / (w1 + K w2) with a fitted parameter K. It reduces to the Fox equation when K = Tg1/Tg2 and to the mass average when K = 1, so K measures deviation from simple mixing.
How much plasticizer is needed to reach a target Tg?
Rearranging Fox gives w1 = (1/Tg - 1/Tg2) / (1/Tg1 - 1/Tg2). For a polymer of Tg 354 K, a plasticizer of Tg 200 K (illustrative) and a target of 293 K, w1 = 0.7296, so the plasticizer fraction is 0.2704 or 27 percent by mass.
Why is the Fox Tg lower than the mass average?
The Fox equation is a harmonic mean of the two Tg values, and a harmonic mean is never above the arithmetic mean. The difference grows with the gap between the two Tg values: 20 K for 354 K and 200 K at 70:30, but almost nothing for 373 K and 378 K.
What are typical glass transition temperatures of common polymers?
Illustrative magnitudes are polystyrene near 373 K, PMMA near 378 K and PVC near 354 K. Polyethylene is reported over a wide range, often around 153 K (about minus 120 degrees Celsius). Always use values measured for your grade and method.
When does the Fox equation fail?
It ignores specific interactions, sequence effects and the free-volume mismatch between components. Immiscible blends show two Tg values instead of one, and strongly interacting blends can show Tg above the mixing-rule prediction.
Can I use the Fox equation for a polymer with a small-molecule additive?
Yes, provided the additive is miscible. Use the additive's glass transition temperature (often estimated or measured from the glassy state) as Tg2. This is the standard way to estimate plasticizer and water effects on Tg.
Is Tg a single fixed temperature?
No. The glass transition is a kinetic phenomenon, so the measured value shifts by a few kelvin with cooling rate, heating rate and technique. Treat any Tg as a temperature associated with a specific measurement, not a sharp material constant.