Blob Size and Correlation Length Calculator

Find the blob size and correlation length of a semidilute polymer solution, a stretched chain or a chain near its theta point.

🫧 Blob Size and Correlation Length Calculator
Solvent quality preset for the exponent
Exponent (ν)
Monomer size (a, illustrative)
nm
Monomers per chain (N)
Polymer volume fraction (φ)
Solvent
Temperature (T)
K
Force (f)
pN
Segment length (b, illustrative)
nm
Segments (N)
Temperature (T)
K
Theta temperature (θ)
K
Segment length (b, illustrative)
nm
Segments (N)
Correlation length (ξ)
—
Monomers per blob (g)
—
Blobs per chain (N/g)
—
Overlap fraction φ*
—
Dilute Flory radius
—
Chain size in solution
—
Exponent ν/(3ν−1)
—
Regime
—

Tension blob size (ξt = kT/f)
—
Segments per blob (g)
—
Blobs per chain
—
Extension
—
Fraction of contour length
—
Thermal energy kT
—
Unstretched size R0
—
Saturation force kT/b
—

Thermal blob size (ξT)
—
Reduced temperature τ
—
Segments per blob (gT)
—
Blobs per chain
—
Chain size R
—
Ideal size b√N
—
Swelling ratio R/Rideal
—
Regime
—

🫧 What is Blob Size and Correlation Length?

A blob is the central idea of de Gennes scaling theory for polymers. Instead of following every monomer, you cut the chain into sub-chains of g monomers whose size is a single length ξ. Inside one blob the chain behaves as if it were alone, so the blob has the statistics of an isolated chain. On scales larger than ξ the picture changes, and the blobs behave like beads that are packed, stretched or screened depending on the situation. This calculator covers the three classic blob problems: the correlation length of a semidilute solution, the tension blobs of a chain under force, and the thermal blob of a chain near its theta temperature.

In a semidilute solution the polymer coils overlap and form a transient mesh. The mesh size is the correlation length ξ. It is the distance over which the monomer density fluctuations are correlated, and it is the length scale you measure in small-angle neutron scattering. It shrinks as the concentration rises, following ξ = a φ−ν/(3ν−1), and remarkably it does not depend on the chain length. That independence is why concentrated solutions of different molar masses share the same osmotic pressure and the same short-time dynamics.

Researchers and process engineers use blobs for many practical questions. Polymer physicists estimate the mesh size of gels and semidilute solutions, biophysicists model DNA or protein unfolding under optical-tweezer force, and formulation scientists judge how a thickener will entangle at a given concentration. The tension blob result explains why a chain extends almost linearly at weak force and then saturates near its contour length, and the thermal blob explains why a polymer stays ideal for short lengths close to its theta point and swells only for long ones.

A common misconception is that a blob is a physical bead with a sharp edge. It is a scaling construct, so every relation holds only up to a numerical factor of order one, and the crossovers between regimes are smooth. Another misconception is that the semidilute blob size depends on N, when it depends only on concentration and solvent quality. The chart in each mode shows the trend around your chosen point, and the notes under the results say which regime your inputs fall in. For related sizes see the radius of gyration calculator and the Flory exponent calculator.

📐 Formula

ξ  =  a φ−ν/(3ν−1),   g  =  (ξ/a)1/ν,   φ*  =  N1−3ν
ξ = correlation length or blob size (nm)
a = monomer size (nm), illustrative default 0.25 nm
φ = polymer volume fraction, φ* = overlap volume fraction
ν = Flory exponent, 0.588 in a good solvent and 0.5 at theta
g = monomers per blob, N = monomers per chain
Chain size: R = ξ(N/g)1/2 = a N1/2 φ(1−2ν)/(2(3ν−1))
Example: a = 0.25 nm, φ = 0.1, ν = 0.588 gives ξ = 0.25 × 0.1−0.7696 = 1.471 nm
ξt  =  kT / f,   L  =  (N/g) ξt,   ξT  =  b / τ,   gT  =  τ−2
f = stretching force (pN), kT = thermal energy (4.116 pN nm at 298.15 K)
L = extension, capped at the contour length N b; g = (ξt/b)1/ν
τ = (T − θ)/θ the swollen chain size is R = ξT(N/gT)ν for N > gT
Example: T = 330 K, θ = 300 K gives τ = 0.1, ξT = 5 nm and gT = 100 for b = 0.5 nm

📖 How to Use This Calculator

Three modes

1
Choose a mode - Pick Semidilute for the correlation length of a concentrated solution, Tension blobs for a chain pulled by a force, or Thermal blob for a chain near its theta temperature.
2
Enter the chain and solution parameters - Type the monomer or segment length, the number of segments, and the volume fraction, force or temperatures that apply to the chosen mode. The solvent preset fills the exponent for you.
3
Read the blob size and the chart - Read the blob size in nanometres with the monomers per blob and the chain size, then check the chart to see how the result changes around your chosen point, marked with a dashed guide.
4
Check the regime note - The sentence under the results tells you whether the solution is dilute or semidilute, whether the force is weak or saturating, or whether the chain is ideal or swollen.

💡 Example Calculations

Example 1 - Good-solvent semidilute solution

a = 0.25 nm (illustrative), N = 1000, φ = 0.1, ν = 0.588

1
The exponent is ν/(3ν−1) = 0.588/0.764 = 0.7696, so ξ = 0.25 × 0.1−0.7696 = 1.471 nm.
2
Monomers per blob g = (1.471/0.25)1/0.588 = 20.37, so a chain holds N/g = 49.10 blobs.
3
The overlap fraction is φ* = 1000−0.764 = 0.005105, far below 0.1, so the solution is semidilute. The chain size is R = ξ√(N/g) = 10.31 nm, compared with a dilute Flory radius of 14.52 nm.
ξ = 1.471 nm, g = 20.37 monomers per blob
Try this example →

Example 2 - Same solution in a theta solvent

a = 0.25 nm, N = 1000, φ = 0.1, ν = 0.5

1
At ν = 0.5 the exponent is 0.5/0.5 = 1, so ξ = a/φ = 0.25/0.1 = 2.5 nm.
2
Monomers per blob g = (2.5/0.25)2 = 100, giving 10 blobs per chain.
3
The chain size R = 2.5 × √10 = 7.906 nm equals the ideal size a√N, because the concentration exponent is zero at theta.
ξ = 2.5 nm, g = 100, R = 7.906 nm
Try this example →

Example 3 - Chain pulled with 2 pN

T = 298.15 K, f = 2 pN, b = 0.5 nm (illustrative), N = 1000, good solvent

1
kT = 1.380649×10−23 × 298.15 J = 4.116 pN nm, so the tension blob is ξt = 4.116/2 = 2.058 nm.
2
Segments per blob g = (2.058/0.5)1/0.588 = 11.09, so there are 1000/11.09 = 90.14 blobs.
3
Extension = 90.14 × 2.058 = 185.5 nm, which is 37.1 percent of the 500 nm contour length. The unstretched size is R0 = 29.04 nm.
Extension = 185.5 nm (37.1 % of contour length)
Try this example →

Example 4 - Thermal blob 30 K above theta

T = 330 K, θ = 300 K, b = 0.5 nm (illustrative), N = 1000

1
τ = (330 − 300)/300 = 0.1, so ξT = b/τ = 5 nm and gT = 1/τ2 = 100.
2
N/gT = 10 thermal blobs, so R = 5 × 100.588 = 19.36 nm.
3
The ideal size is 0.5 × √1000 = 15.81 nm, so the chain is swollen by a factor of 1.225.
ξT = 5 nm, R = 19.36 nm, swelling = 1.225
Try this example →

❓ Frequently Asked Questions

What is a blob in polymer physics?+
A blob is a sub-chain of g monomers that is treated as a unit of size xi. Inside the blob the chain follows the statistics of an isolated chain, and on larger scales the blobs are packed together or aligned. De Gennes introduced the idea to turn complicated polymer problems into simple counting arguments.
What is the correlation length of a semidilute polymer solution?+
The correlation length xi is the mesh size of the transient network formed by overlapping chains. In a good solvent xi = a phi^(-nu/(3nu-1)), which is close to a phi^-0.77 for nu = 0.588. It decreases as the concentration rises and does not depend on the chain length.
How do you calculate the number of monomers per blob?+
Use g = (xi/a)^(1/nu). For a = 0.25 nm, phi = 0.1 and nu = 0.588 the correlation length is 1.471 nm, so g = (1.471/0.25)^(1/0.588) = 20.4 monomers per blob. The chain then contains N/g = 49.1 blobs when N = 1000.
What is the overlap concentration phi star?+
The overlap volume fraction is phi* = N^(1-3nu), the concentration at which chains of Flory size a N^nu fill all of space. For N = 1000 and nu = 0.588 it is 0.0051. Above phi* the solution is semidilute and the blob picture applies; below it the solution is dilute.
What is the exponent nu/(3nu-1)?+
It comes from requiring that xi be independent of N and equal to the Flory size when phi = phi*. With nu = 0.588 the exponent is 0.770. With nu = 0.5 (theta solvent) it is 1.0 and with nu = 0.6 it is 0.75, so xi falls more slowly with concentration in a good solvent.
What is a Pincus tension blob?+
When a chain is pulled with force f, the blob size is set by the balance of thermal energy and work, xi = kT/f. Segments inside the blob are unperturbed and the blobs line up along the force, giving an extension of (N/g) xi. At 298.15 K and 2 pN, xi = 2.06 nm.
How large is the extension of a chain under force?+
For a good solvent the extension is N b (b f/kT)^((1-nu)/nu), which is about N b (b f/kT)^0.70. For b = 0.5 nm, N = 1000 and f = 2 pN at 298.15 K this gives 185.5 nm, or 37.1 percent of the 500 nm contour length.
What is a thermal blob?+
Near the theta temperature the excluded volume is small. A thermal blob is the length scale below which excluded-volume energy is smaller than kT. Its size is xi_T = b/tau and it holds g_T = 1/tau^2 segments, where tau = (T - theta)/theta. Above this scale the chain swells.
How do blob size and chain size relate in a semidilute solution?+
A chain in a semidilute solution is a random walk of N/g blobs, so R = xi (N/g)^(1/2). In terms of concentration, R = a N^(1/2) phi^((1-2nu)/(2(3nu-1))). In a theta solvent the exponent is zero and R is independent of concentration.
Does the blob model apply to real polymers exactly?+
No. It is a scaling theory in which every relation holds up to a numerical factor of order one, and the crossovers are gradual rather than sharp. It captures the exponents well, and experiments on solutions such as polystyrene in toluene agree with the semidilute scaling for long chains.

📚 Sources and Notes

The semidilute scaling xi ~ Rg(c/c*)−ν/(3ν−1), with exponent about 0.77 in a good solvent, and the blob picture of screened excluded volume are described in A multi-blob representation of semi-dilute polymer solutions, Semidilute Polymer Solutions at Equilibrium and under Shear Flow and Universal dynamics of dilute and semidilute solutions of flexible linear polymers. The tension-blob and thermal-blob relations are the standard scaling forms found in polymer physics textbooks and were not checked against a specific web page. The monomer size, segment length and temperatures used in the examples are illustrative values, not measured data, and all prefactors are taken as one.

See also the polymer physics calculators and the osmotic pressure of polymer solution calculator.

What is a blob in polymer physics?

A blob is a sub-chain of g monomers that is treated as a unit of size xi. Inside the blob the chain follows the statistics of an isolated chain, and on larger scales the blobs are packed together or aligned. De Gennes introduced the idea to turn complicated polymer problems into simple counting arguments.

What is the correlation length of a semidilute polymer solution?

The correlation length xi is the mesh size of the transient network formed by overlapping chains. In a good solvent xi = a phi^(-nu/(3nu-1)), which is close to a phi^-0.77 for nu = 0.588. It decreases as the concentration rises and does not depend on the chain length.

How do you calculate the number of monomers per blob?

Use g = (xi/a)^(1/nu). For a = 0.25 nm, phi = 0.1 and nu = 0.588 the correlation length is 1.471 nm, so g = (1.471/0.25)^(1/0.588) = 20.4 monomers per blob. The chain then contains N/g = 49.1 blobs when N = 1000.

What is the overlap concentration phi star?

The overlap volume fraction is phi* = N^(1-3nu), the concentration at which chains of Flory size a N^nu fill all of space. For N = 1000 and nu = 0.588 it is 0.0051. Above phi* the solution is semidilute and the blob picture applies; below it the solution is dilute.

What is the exponent nu/(3nu-1)?

It comes from requiring that xi be independent of N and equal to the Flory size when phi = phi*. With nu = 0.588 the exponent is 0.770. With nu = 0.5 (theta solvent) it is 1.0 and with nu = 0.6 it is 0.75, so xi falls more slowly with concentration in a good solvent.

What is a Pincus tension blob?

When a chain is pulled with force f, the blob size is set by the balance of thermal energy and work, xi = kT/f. Segments inside the blob are unperturbed and the blobs line up along the force, giving an extension of (N/g) xi. At 298.15 K and 2 pN, xi = 2.06 nm.

How large is the extension of a chain under force?

For a good solvent the extension is N b (b f/kT)^((1-nu)/nu), which is about N b (b f/kT)^0.70. For b = 0.5 nm, N = 1000 and f = 2 pN at 298.15 K this gives 185.5 nm, or 37.1 percent of the 500 nm contour length.

What is a thermal blob?

Near the theta temperature the excluded volume is small. A thermal blob is the length scale below which excluded-volume energy is smaller than kT. Its size is xi_T = b/tau and it holds g_T = 1/tau^2 segments, where tau = (T - theta)/theta. Above this scale the chain swells.

How do blob size and chain size relate in a semidilute solution?

A chain in a semidilute solution is a random walk of N/g blobs, so R = xi (N/g)^(1/2). In terms of concentration, R = a N^(1/2) phi^((1-2nu)/(2(3nu-1))). In a theta solvent the exponent is zero and R is independent of concentration.

Does the blob model apply to real polymers exactly?

No. It is a scaling theory in which every relation holds up to a numerical factor of order one, and the crossovers are gradual rather than sharp. It captures the exponents well, and experiments on solutions such as polystyrene in toluene agree with the semidilute scaling for long chains.