Mass Moment of Inertia Calculator

Get the mass moment of inertia of common solids about a chosen axis, with the parallel axis theorem and unit conversions.

🌀 Mass Moment of Inertia Calculator
Shape
Length unit
Mass (m)
0.5100
Rod length (L)
0.15
Radius (R)
0.052
Inner radius (R1)
Outer radius (R2)
Side a
Side b
Axis offset from the centre of mass (d)
02
Moment of inertia about the centre of mass (Icm)
kg·m²
Mass (m)
kg
Axis distance (d)
m
Moment of inertia (I)
—
About the centre of mass (Icm)
—
Offset term m d²
—
Radius of gyration (k)
—
In lb·ft²
—
In g·cm²
—

Moment of inertia (I)
—
Offset term m d²
—
Increase over Icm
—
Radius of gyration (centre)
—
Radius of gyration (new axis)
—
In lb·ft²
—

🌀 What is Mass Moment of Inertia?

Mass moment of inertia is the rotational counterpart of mass. It measures how strongly a body resists a change in its spin about a given axis, and it is defined by adding up m r² over every bit of mass, where r is that bit's distance from the axis. The equation of motion for rotation, torque = I × angular acceleration, mirrors Newton's second law, and the rotational kinetic energy is ½ I ω². Because r is squared, mass far from the axis matters far more than mass near it, which is why a ring is harder to spin than a disk of the same mass and radius.

The quantity appears throughout engineering and physics. Designers use it to size flywheels, motors and gearboxes, because the torque needed to reach a speed in a given time is proportional to I. Roboticists use it to tune arms and wheels. Athletes and divers change their moment of inertia by tucking in. Mechanical engineers use it for crankshafts, rotors, turbine wheels and pendulums, and astronomers use it to describe the internal structure of planets. Whenever a body rotates, I decides how its angular momentum and energy relate to its speed.

Two points commonly cause confusion. First, a body has a different moment of inertia about every axis, so you must always say which axis. A rod about its centre has m L²/12, but about its end it has m L²/3. The parallel axis theorem, I = Icm + m d², links parallel axes and requires Icm to be about the centre of mass. Second, do not confuse this mass property (kg·m²) with the area moment of inertia (m⁴) used for beam bending, or the polar moment of inertia of a shaft section, which the polar moment of inertia calculator covers.

This calculator provides closed-form results for seven standard solids and accepts mass in kg, g or lb and lengths in m, cm, mm, in or ft. It returns I in kg·m², lb·ft² and g·cm², the radius of gyration, and a chart of how I grows as the axis moves away from the centre of mass. A second mode applies the parallel axis theorem to any body whose Icm you already know. To turn I into energy see the rotational kinetic energy calculator, and for swinging bodies see the physical pendulum calculator.

📐 Formula

I  =  ∑ mi ri²  →  I  =  Icm + m d²
Uniform rod (axis perpendicular, through the centre): Icm = m L² / 12
Solid disk or cylinder (about its axis): Icm = ½ m R²
Thin cylindrical shell or ring (about its axis): Icm = m R²
Thick hollow cylinder (inner R1, outer R2): Icm = ½ m ( R1² + R2² )
Solid sphere (about a diameter): Icm = (2/5) m R²
Thin spherical shell (about a diameter): Icm = (2/3) m R²
Rectangular plate (axis perpendicular through the centre, sides a and b): Icm = m ( a² + b² ) / 12
d = distance between the axis you want and the parallel axis through the centre of mass (m). k = √( I / m ) is the radius of gyration.
Unit conversions: 1 kg·m² = 23.730 lb·ft² = 10,000,000 g·cm²
Example: a 2 kg, 1 m rod has Icm = 2 × 1 / 12 = 0.166667 kg·m²

📖 How to Use This Calculator

Steps

1
Choose a mode. Pick Standard solid to compute I from a shape, mass and size, or Parallel axis to shift a known I about the centre of mass to a new parallel axis.
2
Enter the shape, mass and size. Choose the shape, then type its mass and dimensions. The unit menus only tell the calculator how to read the numbers you typed. Enter an axis offset d, or leave 0 for the axis through the centre of mass.
3
Read the result and chart. See I in kg·m², lb·ft² and g·cm² with the radius of gyration. The chart shows I against the axis offset, with your point marked.

💡 Example Calculations

Example 1 — Rod About Its Centre

Uniform rod, m = 2 kg, L = 1 m, axis through the centre

1
I = m L² / 12 = 2 × 1² / 12
2
I = 0.166667 kg·m², which is 3.9551 lb·ft²
3
k = √( 0.166667 / 2 ) = 0.28868 m, equal to L / √12
I = 0.166667 kg·m²
Try this example →

Example 2 — The Same Rod About Its End

m = 2 kg, L = 1 m, axis at one end, so d = L / 2 = 0.5 m

1
Icm = 0.166667 kg·m² and m d² = 2 × 0.5² = 0.500000 kg·m²
2
I = 0.166667 + 0.500000 = 0.666667 kg·m², which equals m L² / 3 = 2 / 3
3
The moment of inertia is four times larger than about the centre, and k = 0.57735 m.
I = 0.666667 kg·m²
Try this example →

Example 3 — Flywheel Disk

Solid disk, m = 5 kg, R = 20 cm

1
R = 20 cm = 0.20 m, so R² = 0.04 m²
2
I = ½ m R² = 0.5 × 5 × 0.04 = 0.100000 kg·m², or 2.3730 lb·ft²
3
k = R / √2 = 0.14142 m
I = 0.100000 kg·m²
Try this example →

Example 4 — Hollow Roller

Thick hollow cylinder, m = 10 kg, R1 = 0.08 m, R2 = 0.10 m

1
R1² + R2² = 0.0064 + 0.0100 = 0.0164 m²
2
I = ½ × 10 × 0.0164 = 0.082000 kg·m², with k = 0.09055 m
I = 0.082000 kg·m²
Try this example →

Example 5 — Solid Sphere in Pounds and Centimetres

Solid sphere, 16 lb, R = 10.9 cm (an assumed bowling-ball-like size)

1
m = 16 × 0.45359237 = 7.2575 kg and R = 0.109 m
2
I = (2/5) m R² = 0.4 × 7.2575 × 0.011881 = 0.034490 kg·m², or 0.818471 lb·ft²
3
A real ball is not perfectly uniform, so this is an idealised value.
I = 0.034490 kg·m²
Try this example →

Example 6 — Thin Spherical Shell

Hollow ball, m = 620 g, R = 0.12 m (an assumed ball-like size)

1
m = 620 g = 0.62 kg and R² = 0.0144 m²
2
I = (2/3) m R² = 0.66667 × 0.62 × 0.0144 = 0.005952 kg·m², k = 0.09798 m
I = 0.005952 kg·m²
Try this example →

Example 7 — Rectangular Plate

Plate 0.6 m by 0.4 m, m = 3 kg, axis perpendicular through the centre

1
a² + b² = 0.36 + 0.16 = 0.52 m²
2
I = m ( a² + b² ) / 12 = 3 × 0.52 / 12 = 0.130000 kg·m²
I = 0.130000 kg·m²
Try this example →

Example 8 — Parallel Axis Theorem for Any Body

A body with Icm = 0.5 kg·m² and m = 4 kg, rotated about an axis 0.3 m from its centre of mass

1
m d² = 4 × 0.3² = 0.360000 kg·m²
2
I = 0.5 + 0.36 = 0.860000 kg·m², which is 1.720 times Icm
3
The radius of gyration grows from √( 0.5 / 4 ) = 0.35355 m to √( 0.86 / 4 ) = 0.46368 m.
I = 0.860000 kg·m²
Try this example →

❓ Frequently Asked Questions

What is mass moment of inertia?+
It is the rotational equivalent of mass: I is the sum of m r squared over all mass elements, where r is the distance from the axis. It tells you how hard a body is to spin, through torque = I x angular acceleration.
What is the moment of inertia of a rod about its centre?+
I = m L squared / 12 for a thin uniform rod with the axis perpendicular to it through the middle. A 2 kg, 1 m rod gives 0.166667 kg m2. About one end it is m L squared / 3, which is 0.666667 kg m2.
What is the moment of inertia of a solid disk?+
I = m R squared / 2 about its axis. A 5 kg disk with a 20 cm radius has I = 0.5 x 5 x 0.04 = 0.1 kg m2. A solid cylinder has the same formula, whatever its length.
What is the moment of inertia of a solid sphere?+
I = 2 m R squared / 5 about any diameter. A thin spherical shell has 2 m R squared / 3, which is larger because all its mass is at the full radius.
What is the difference between mass moment of inertia and area moment of inertia?+
Mass moment of inertia (kg m2) resists angular acceleration and uses mass. Area moment of inertia (m4) describes how a cross-section resists bending or twisting and uses area. This page covers the mass moment of inertia only.
How does the parallel axis theorem work?+
I = I_cm + m d squared, where I_cm is about a parallel axis through the centre of mass and d is the distance between the axes. A disk of radius R pivoted at its rim has I = m R squared / 2 + m R squared = 1.5 m R squared.
What is the moment of inertia of a hollow cylinder?+
I = m (R1 squared + R2 squared) / 2 for inner radius R1 and outer radius R2. A 10 kg pipe with R1 = 0.08 m and R2 = 0.10 m has I = 0.082 kg m2. As R1 approaches R2 it approaches the thin shell value m R squared.
What is the moment of inertia of a rectangular plate?+
For an axis perpendicular to the plate through its centre, I = m (a squared + b squared) / 12 for sides a and b. A 3 kg plate measuring 0.6 m by 0.4 m has I = 0.13 kg m2.
What is the radius of gyration?+
It is k = sqrt(I / m), the distance at which a point mass equal to the whole mass would have the same moment of inertia. For a solid disk k = R / sqrt(2), about 0.707 R.
How do I convert kg m2 to lb ft2?+
Multiply by 23.73. This comes from 1 lb ft2 = 0.45359237 x 0.3048 squared = 0.042140 kg m2. The calculator shows lb ft2 and g cm2 beside the SI value.
How is this different from the polar moment of inertia calculator?+
The polar moment of inertia is an area property (m4 or mm4) of a shaft cross-section used for torsion. This page computes the mass moment of inertia (kg m2) of a solid body, used for rotational dynamics and energy.

What is mass moment of inertia?

It is the rotational equivalent of mass: I = sum of m r squared over all mass elements, where r is the distance from the axis. It tells you how hard a body is to spin, through torque = I x angular acceleration.

What is the moment of inertia of a rod about its centre?

I = m L squared / 12 for a thin uniform rod with the axis perpendicular to it through the middle. A 2 kg, 1 m rod gives 0.166667 kg m2. About one end it is m L squared / 3, which is 0.666667 kg m2.

What is the moment of inertia of a solid disk?

I = m R squared / 2 about its axis. A 5 kg disk with a 20 cm radius has I = 0.5 x 5 x 0.04 = 0.1 kg m2. A solid cylinder has the same formula, whatever its length.

What is the moment of inertia of a solid sphere?

I = 2 m R squared / 5 about any diameter. A thin spherical shell has 2 m R squared / 3, which is larger because all its mass is at the full radius.

What is the difference between mass moment of inertia and area moment of inertia?

Mass moment of inertia (kg m2) resists angular acceleration and uses mass. Area moment of inertia (m4) describes how a cross-section resists bending or twisting and uses area. This page covers mass moment of inertia only.

How does the parallel axis theorem work?

I = I_cm + m d squared, where I_cm is about a parallel axis through the centre of mass and d is the distance between the axes. A disk of radius R pivoted at its rim has I = m R squared / 2 + m R squared = 1.5 m R squared.

What is the moment of inertia of a hollow cylinder?

I = m (R1 squared + R2 squared) / 2 for inner radius R1 and outer radius R2. A 10 kg pipe with R1 = 0.08 m and R2 = 0.10 m has I = 0.082 kg m2. As R1 approaches R2 it approaches the thin shell value m R squared.

What is the moment of inertia of a rectangular plate?

For an axis perpendicular to the plate through its centre, I = m (a squared + b squared) / 12 for sides a and b. A 3 kg plate 0.6 m by 0.4 m has I = 0.13 kg m2.

What is the radius of gyration?

It is k = sqrt(I / m), the distance at which a point mass equal to the whole mass would have the same moment of inertia. For a solid disk k = R / sqrt(2), about 0.707 R.

How do I convert kg m2 to lb ft2?

Multiply by 23.73. This comes from 1 lb ft2 = 0.45359237 x 0.3048 squared = 0.042140 kg m2. The calculator shows lb ft2 and g cm2 beside the SI value.

How is this different from the polar moment of inertia calculator?

The polar moment of inertia is an area property (m4 or mm4) of a shaft cross-section used for torsion. This page computes the mass moment of inertia (kg m2) of a solid body, used for rotational dynamics and energy.