Frequency Calculator

Find frequency in hertz from a period, a wavelength and wave speed, a cycle count or a rotation speed, with the period and angular frequency alongside.

📻 Frequency Calculator
Period (T)
Cycles or events (N)
Time taken (t)
Wave type (illustrative speeds)
Wave speed (v)
m/s
Wavelength (λ)
Rotation rate
Frequency
—
In hertz
—
Period
—
Angular frequency
—
Cycles per minute
—

Frequency
—
In hertz
—
Period
—
Angular frequency
—
Cycles per minute
—

Frequency
—
In hertz
—
Period
—
Angular frequency
—
Cycles per minute
—
Wavenumber k
—

Frequency
—
In hertz
—
Period per turn
—
Angular frequency
—
Revolutions per minute
—
Degrees per second
—

📻 What is Frequency?

Frequency is the number of times a repeating event happens in one second. Its SI unit is the hertz (Hz), where 1 Hz is one cycle per second. A pendulum that swings back and forth twice each second has a frequency of 2 Hz, mains electricity runs at 50 or 60 Hz depending on the country, and a violin string tuned to concert A vibrates 440 times each second. Frequency is the reciprocal of the period, the time one cycle takes, so f = 1/T. A short period means a high frequency, and a long period means a low one.

The idea is used almost everywhere. Audio engineers talk about the frequency of a note to describe pitch, radio engineers assign stations by frequency, and doctors count heartbeats per minute. Mechanical engineers convert shaft speeds from rpm to hertz to check for vibration, and physicists use frequency to describe light, where each colour corresponds to a different number of oscillations per second. Because the unit scale is huge, results are written with prefixes: kilohertz, megahertz, gigahertz and terahertz.

It helps to separate frequency from nearby ideas. This page returns frequency f in hertz, while the angular frequency calculator focuses on omega in radians per second and on springs, pendulums and circuits. For a travelling wave, frequency is tied to wavelength and speed by v = f times the wavelength, which the harmonic wave equation calculator builds into a full wave function. Frequency also stays fixed when a wave crosses into a new medium, even though the speed and wavelength change.

This calculator has four modes because people arrive with different information. Use Period when you know how long one cycle lasts, Cycle count when you counted events over a time, Wave when you know the wave speed and wavelength, and Rotation when you know a spinning speed in rpm, rad/s or degrees per second. Every mode returns the frequency, the period, the angular frequency and the rate per minute. Period and Wave also draw a chart of frequency against the quantity you entered, Cycle count adds a table of cycles completed over time, and Rotation draws three revolutions as a waveform.

📐 Formula

f  =  1 ÷ T  =  v ÷ λ  =  N ÷ t
f = frequency in hertz (cycles per second)
T = period in seconds, the time of one cycle
v = wave speed in m/s and λ = wavelength in metres
N = number of cycles or events counted in a time t seconds
Rotation: f = rpm ÷ 60 = ω ÷ 2π = (degrees per second) ÷ 360
Angular frequency: ω = 2πf in rad/s, and wavenumber k = 2π / λ in rad/m
Example: a period of 20 ms gives f = 1 / 0.020 = 50 Hz

📖 How to Use This Calculator

Steps

1
Choose a mode. Pick Period, Cycle count, Wave or Rotation depending on what you know about the repeating event.
2
Enter the value and its unit. Type the period, the count and the time, the wave speed and wavelength, or the rotation rate, and choose the matching unit. A unit selector only labels the number you typed.
3
Read the frequency. The result shows frequency in the most readable hertz unit, plain hertz, period, angular frequency and the rate per minute, plus the chart or table for your mode.

💡 Example Calculations

Example 1 — Mains Electricity Period

One cycle lasts 20 ms

1
Convert to seconds: 20 ms = 20 × 0.001 = 0.020 s
2
f = 1 / 0.020 = 50 Hz
3
ω = 2π × 50 = 314.159 rad/s and the rate is 50 × 60 = 3000 cycles per minute
Frequency = 50.000 Hz
Try this example →

Example 2 — Heart Rate

72 beats counted in 1 minute

1
Time in seconds = 1 × 60 = 60 s
2
f = 72 / 60 = 1.2 Hz
3
Period = 1 / 1.2 = 833.333 ms between beats and ω = 7.5398 rad/s
Frequency = 1.200 Hz
Try this example →

Example 3 — Sound Wave in Air

Speed 343 m/s (air at about 20 °C) and wavelength 0.5 m

1
f = v / λ = 343 / 0.5 = 686 Hz
2
Period = 1 / 686 = 1.458 ms and ω = 2π × 686 = 4310.265 rad/s
3
Wavenumber k = 2π / 0.5 = 12.5664 rad/m
Frequency = 686.000 Hz
Try this example →

Example 4 — Green Light

Speed of light 299792458 m/s and wavelength 555 nm

1
Wavelength in metres: 555 nm = 555 × 10-9 m
2
f = 299792458 / 5.55×10-7 = 5.4017×1014 Hz = 540.167 THz
3
Period = 1 / f = 1.851 fs (femtoseconds)
Frequency = 540.167 THz
Try this example →

Example 5 — Hard Drive Spindle

A disk spinning at 7200 rpm

1
f = 7200 / 60 = 120 Hz
2
Period per turn = 1 / 120 = 8.333 ms
3
ω = 2π × 120 = 753.982 rad/s and the spin is 120 × 360 = 43,200 degrees per second
Frequency = 120.000 Hz
Try this example →

❓ Frequently Asked Questions

What is the formula for frequency?+
Frequency is the reciprocal of the period, f = 1 / T. For a wave it is also f = v / wavelength, where v is the wave speed. For counted events it is f = N / t, the number of cycles divided by the time taken.
How do I convert period to frequency?+
Divide 1 by the period in seconds. A period of 20 ms is 0.02 s, so the frequency is 1 / 0.02 = 50 Hz. Pick the period unit in the calculator and it handles the unit conversion for you.
How do I convert rpm to hertz?+
Divide revolutions per minute by 60 to get revolutions per second, which is hertz. 3000 rpm is 50 Hz, and 7200 rpm is 120 Hz. To go the other way multiply hertz by 60.
How do I find frequency from wavelength?+
Divide the wave speed by the wavelength, f = v / wavelength. In air at about 343 m/s a 0.5 m wavelength gives 686 Hz. For light in a vacuum use 299,792,458 m/s, so 555 nm gives about 540 THz.
What is the unit of frequency?+
The SI unit is the hertz (Hz), one cycle per second. Larger units are the kilohertz (1,000 Hz), megahertz (one million Hz), gigahertz and terahertz. The calculator chooses the unit that keeps the number readable.
What is the difference between frequency and angular frequency?+
Frequency f counts cycles per second in hertz. Angular frequency omega counts radians per second and equals 2 pi f. They describe the same oscillation, and omega is the form used in equations like sin(omega t).
What is the frequency of mains electricity?+
Mains frequency is 50 Hz in many countries and 60 Hz in others, which corresponds to periods of 20 ms and about 16.67 ms. Enter either period in the calculator to check the result.
How do I find the frequency of a heartbeat?+
Use the Cycle count mode: enter the number of beats and the time. 72 beats in 1 minute is 72 / 60 = 1.2 Hz, with a period of about 0.833 s between beats.
Does frequency change when a wave enters a new medium?+
No. The frequency is set by the source and stays the same across a boundary, while the wave speed and wavelength change together so that v / wavelength stays equal to f.
What is the frequency of visible light?+
Visible light spans roughly 430 to 750 THz in a vacuum. Green light at 555 nm is about 540 THz, which the Wave mode shows with the speed of light preset.
Why does the unit selector not change my number?+
The selector tells the calculator what unit the number you typed is in. It never rewrites the number, so after changing from milliseconds to seconds, retype the value you want.

What is the formula for frequency?

Frequency is the reciprocal of the period, f = 1 / T. For a wave it is also f = v / wavelength, where v is the wave speed. For counted events it is f = N / t, the number of cycles divided by the time taken.

How do I convert period to frequency?

Divide 1 by the period in seconds. A period of 20 ms is 0.02 s, so the frequency is 1 / 0.02 = 50 Hz. Pick the period unit in the calculator and it does the unit handling for you.

How do I convert rpm to hertz?

Divide revolutions per minute by 60 to get revolutions per second, which is hertz. 3000 rpm is 50 Hz, and 7200 rpm is 120 Hz. To go the other way multiply hertz by 60.

How do I find frequency from wavelength?

Divide the wave speed by the wavelength, f = v / wavelength. In air at about 343 m/s a 0.5 m wavelength gives 686 Hz. For light in a vacuum use 299,792,458 m/s, so 555 nm gives about 540 THz.

What is the unit of frequency?

The SI unit is the hertz (Hz), one cycle per second. Larger units are the kilohertz (1,000 Hz), megahertz (one million Hz), gigahertz and terahertz. The calculator chooses the unit that keeps the number readable.

What is the difference between frequency and angular frequency?

Frequency f counts cycles per second in hertz. Angular frequency omega counts radians per second and equals 2 pi f. They describe the same oscillation, and omega is the form used in equations like sin(omega t).

What is the frequency of mains electricity?

Mains frequency is 50 Hz in many countries and 60 Hz in others, which corresponds to periods of 20 ms and about 16.67 ms. Enter either period to check the result.

How do I find the frequency of a heartbeat?

Use the count mode: enter the number of beats and the time. 72 beats in 1 minute is 72 / 60 = 1.2 Hz, with a period of about 0.833 s between beats.

Does frequency change when a wave enters a new medium?

No. The frequency is set by the source and stays the same across a boundary, while the wave speed and wavelength change together so that v / wavelength stays equal to f.

What is the frequency of visible light?

Visible light spans roughly 430 to 750 THz in a vacuum. Green light at 555 nm is about 540 THz, which the wave mode shows with the speed of light preset.