Electric Potential Calculator

Find the electric potential of charges, the energy stored in a charge pair, and the work to move a charge through a voltage difference.

🔋 Electric Potential Calculator
Medium (not used by Move a charge)
Relative permittivity (εr)
Source charge (q)
Distance from the charge (r)
Test charge for its energy (optional)
Show energy in
Charge q1
Charge q2
Separation (r)
Show energy in
Charge being moved (q)
Potential at start (VA)
Potential at end (VB)
Particle
Mass (m)
kg
Show energy in
Charge A (qA)
Position of A (xA)
m
Charge B (qB)
Position of B (xB)
m
Point where V is found (x)
m
Electric potential V
—
Sign
—
Energy of the test charge
—
Potential in vacuum
—
Potential at 2r
—
Field |E| = |V| / r
—
Equipotential surface
—

Potential energy U
—
U in joules
—
U in electron-volts
—
Interaction
—
Bringing them in
—
Energy to separate to infinity
—

Potential energy change ΔU = qΔV
—
Potential difference ΔV
—
Work done by the field
—
ΔU in electron-volts
—
Kinetic energy if released
—
Speed if released
—

Total potential V
—
Sign
—
From A
—
From B
—
Zero-potential points
—

🔋 What is Electric Potential?

Electric potential is the electric potential energy per unit charge at a point in space. It tells you how much work an outside agent must do, per coulomb, to bring a small positive test charge from a reference point (usually infinitely far away) to that point without speeding it up. It is measured in volts, where one volt is one joule per coulomb. Because it is energy per charge, it does not depend on the test charge, and it is a scalar: a single signed number at each point, with no direction. The voltage in a battery, a power line or a lightning cloud is a difference of this potential between two points.

The calculator covers the four everyday questions. First, the potential of a point charge, V = k q / r, together with the energy a test charge would have there. Second, the potential energy stored in a pair of charges, U = k q1 q2 / r, which is the energy needed to assemble them and the energy needed to pull a bound pair apart. Third, the work to move a charge through a potential difference, W = q ΔV, and the speed an electron or proton would gain if released. Fourth, the potential of two charges on a line, where the contributions simply add and the zero-potential points are found for you.

Students meet these ideas in electrostatics courses, but they are also behind electron guns, X-ray tubes, particle accelerators, ion thrusters and mass spectrometers, where a particle falling through a few kilovolts picks up a known energy. Chemists use the same formula to estimate the energy of an ion pair, and the electron-volt option shows the answer in the unit natural to atoms. The potential energy of a pair is also the starting point of the Bohr model of hydrogen.

Keep a few distinctions in mind. Potential is not potential energy, and it is not the field: the field is the negative slope of the potential, so a region of constant potential has no field. Zero potential does not mean zero field, as the two-charge mode shows. The reference level is a choice, so only differences are measurable. For the force between the charges use the Coulomb's law calculator, for the field the electric field calculator, and for particle speed in a field the electron speed calculator.

📐 Formula

V  =  k q / ( εr r ),   U  =  q V  =  k q1 q2 / ( εr r )
V = electric potential (V = J/C), taken as zero at infinite distance
k = 1/(4πε0) = 8.9875517862 × 109 N m²/C², with ε0 = 8.8541878188 × 10-12 F/m (CODATA 2022)
q, q1, q2 = charges (C), signed; r = distance (m); εr = relative permittivity of the medium
U = potential energy (J). U > 0 for like charges (repulsive) and U < 0 for opposite charges (attractive)
Work through a difference: ΔU = q ΔV = q (VB - VA); the field does -ΔU
Speed from rest: v = √( 2 |q ΔV| / m ), valid well below the speed of light
Electron-volt: 1 eV = 1.602176634 × 10-19 J (exact)
Two charges: V = k qA/rA + k qB/rB, with r the distance from each charge
Example: q = 5 nC at r = 30 cm in vacuum gives V = 149.8 V

📖 How to Use This Calculator

Steps

1
Choose a mode. Point charge gives V at a distance, Charge pair gives the interaction energy, Move a charge gives the work and speed for a voltage difference, and Two charges adds potentials on a line.
2
Enter values and units. Type charges with a unit (negative for negative), distances or voltages, and pick the medium. Choose joules or electron-volts for energy results.
3
Read the sign and the chart. Positive or negative results carry physical meaning, and the chart marks your values on the curve against distance, voltage or position.

💡 Example Calculations

Example 1 — Potential of a 5 nC Charge at 30 cm

q = +5 nC, r = 30 cm, vacuum, test charge +2 µC

1
V = k q / r = 8.98755 × 109 × 5 × 10-9 / 0.3 = 149.8 V
2
Energy of the test charge: U = q0 V = 2 × 10-6 × 149.79 = 299.6 µJ
3
At twice the distance the potential is half, 74.90 V. The matching field strength is |V| / r = 499.3 V/m, the same number as the field of this charge.
Potential = 149.8 V, test charge energy = 299.6 µJ
Try this example →

Example 2 — Potential of a Proton at the Bohr Radius

q = +1 e, r = 52.9 pm, vacuum, test charge -1 e (an electron), energy in eV

1
V = k e / r = 8.98755 × 109 × 1.602177 × 10-19 / (52.9 × 10-12) = 27.22 V
2
The electron's potential energy there is U = (-e) V = -27.22 eV, which is negative because the pair is bound.
3
The electron-volt scale of tens of eV is the natural energy scale of atoms.
Potential = 27.22 V, electron energy = -27.22 eV
Try this example →

Example 3 — Energy of Two 1 µC Charges 10 cm Apart

q1 = q2 = +1 µC, r = 10 cm, vacuum

1
U = k q1 q2 / r = 8.98755 × 109 × 10-12 / 0.1
2
U = 89.88 mJ (8.988e-2 J), positive because the charges repel
3
That much work must be done to bring them from far away to 10 cm, and the same energy is released if they fly apart again.
Pair energy = 89.88 mJ (repulsive)
Try this example →

Example 4 — An Ion Pair in Electron-Volts

q1 = +1 e, q2 = -1 e, r = 0.236 nm (an assumed, illustrative ion separation), vacuum

1
U = k (+e)(-e) / r = -8.98755 × 109 × (1.602177 × 10-19)² / (0.236 × 10-9) = -9.776e-19 J
2
Dividing by 1.602177 × 10-19 J/eV gives -6.102 eV
3
The negative sign means the pair is bound, and 6.102 eV is the work needed to separate the point ions to infinity (the real bond energy also includes repulsion at short range).
Pair energy = -6.102 eV (attractive)
Try this example →

Example 5 — An Electron Accelerated Through 100 V

q = -1 e from VA = 0 V to VB = +100 V, electron mass 9.1093837139 × 10-31 kg

1
ΔV = 100 - 0 = 100.0 V and ΔU = q ΔV = (-1 e)(100 V) = -100.0 eV (-1.602e-17 J)
2
The potential energy falls, so the field does +100.0 eV of work and the electron gains 100.0 eV of kinetic energy.
3
v = √( 2 × 1.602177 × 10-17 / 9.109384 × 10-31 ) = 5.931 Mm/s, about 1.98% of the speed of light
Kinetic energy = 100.0 eV, speed = 5.931 Mm/s
Try this example →

Example 6 — Pushing a Positive Charge Uphill in Voltage

q = +2 µC from VA = 0 V to VB = +12 V, energy in joules

1
ΔV = 12 V and ΔU = q ΔV = 2 × 10-6 × 12 = 24.00 µJ
2
The potential energy rises, so an outside agent must supply 24.00 µJ. The field itself does -24.00 µJ of work.
3
Released at B the charge would run back toward A, so the move from A to B is not downhill and no speed is reported.
Work needed = 24.00 µJ
Try this example →

Example 7 — Opposite Charges and Their Zero Points

qA = +2 µC at x = 0, qB = -1 µC at x = 3 m, evaluated at x = 1 m

1
VA = 8.98755 × 109 × 2 × 10-6 / 1 = +17.98 kV
2
VB = 8.98755 × 109 × (-1 × 10-6) / 2 = -4.494 kV, and the total is 13.48 kV
3
The potential is zero where |qA|/rA = |qB|/rB: between the charges at x = 2 m and outside at x = 6 m.
Total potential = 13.48 kV, zero at x = 2.000 m and 6.000 m
Try this example →

Example 8 — Two Equal Positive Charges at the Midpoint

qA = qB = +3 µC at x = 0 and x = 2 m, evaluated at x = 1 m

1
Each charge gives V = 8.98755 × 109 × 3 × 10-6 / 1 = 26.96 kV
2
The total is 2 × 26.96 = 53.93 kV. Like charges never give a zero of potential.
3
At this midpoint the electric field is zero by symmetry, yet the potential is large: zero field does not imply zero potential.
Total potential = 53.93 kV
Try this example →

❓ Frequently Asked Questions

What is the formula for electric potential?+
For a point charge the electric potential is V = k q / r, where k = 8.988e9 N m²/C², q is the charge in coulombs and r is the distance in metres, with V = 0 at infinity. The unit is the volt, 1 V = 1 J/C. Divide by the relative permittivity in a medium.
What is the difference between electric potential and potential energy?+
Potential V is energy per unit charge, in volts. Potential energy U is the energy of a particular charge in that potential, U = q V, in joules. A 2 µC charge at 149.8 V has U = 299.6 µJ.
How do you find the potential energy of two point charges?+
Use U = k q1 q2 / r. It is positive for charges of the same sign (repulsive) and negative for opposite signs (attractive). Two 1 µC charges 10 cm apart have U = 89.88 mJ.
How much work does it take to move a charge through a potential difference?+
The work by an outside agent is W = q ΔV, where ΔV = V_B - V_A. Moving +2 µC through 12 V takes 24 µJ. The electric field does the opposite amount of work, -q ΔV.
What is an electron-volt?+
One electron-volt is the energy an elementary charge gains moving through a potential difference of one volt, exactly 1.602176634e-19 J. It is the natural energy unit for atoms and particles, and the calculator can show energies in J or eV.
How fast is an electron accelerated through 100 volts?+
It gains 100 eV, so its speed is v = sqrt(2 q V / m) = sqrt(2 x 1.602e-19 x 100 / 9.109e-31) = 5.931e6 m/s, about 2 percent of the speed of light, so the non-relativistic formula is still accurate.
Can electric potential be negative?+
Yes. Potential is measured against a reference, normally infinity. Near a negative charge the potential is below that reference, so it is negative. Only differences have physical meaning.
What is an equipotential surface?+
It is a surface where the potential has the same value everywhere. For a point charge the equipotentials are spheres centred on the charge, and no work is done moving a charge along them. The field is always perpendicular to them.
How do you find the potential of two charges?+
Add the potential of each charge, V = k qA / rA + k qB / rB, using the distance from each charge to the point. Because potential is a scalar there are no components. For opposite charges the total is zero at two points on the line through them.
How is the electric potential related to the electric field?+
The field is the negative gradient of the potential, E = -dV/dr along the radial direction. For a point charge V = k q / r gives E = k q / r², which you can compare using the electric field calculator.

What is the formula for electric potential?

For a point charge the electric potential is V = k q / r, where k = 8.988e9 N m²/C², q is the charge in coulombs and r is the distance in metres, with V = 0 at infinity. The unit is the volt, 1 V = 1 J/C. Divide by the relative permittivity in a medium.

What is the difference between electric potential and potential energy?

Potential V is energy per unit charge, in volts. Potential energy U is the energy of a particular charge in that potential, U = q V, in joules. A 2 µC charge at 149.8 V has U = 299.6 µJ.

How do you find the potential energy of two point charges?

Use U = k q1 q2 / r. It is positive for charges of the same sign (repulsive) and negative for opposite signs (attractive). Two 1 µC charges 10 cm apart have U = 89.88 mJ.

How much work does it take to move a charge through a potential difference?

The work by an outside agent is W = q ΔV, where ΔV = V_B - V_A. Moving +2 µC through 12 V takes 24 µJ. The electric field does the opposite amount of work, -q ΔV.

What is an electron-volt?

One electron-volt is the energy an elementary charge gains moving through a potential difference of one volt, exactly 1.602176634e-19 J. It is the natural energy unit for atoms and particles, and the calculator can show energies in J or eV.

How fast is an electron accelerated through 100 volts?

It gains 100 eV, so its speed is v = sqrt(2 q V / m) = sqrt(2 x 1.602e-19 x 100 / 9.109e-31) = 5.931e6 m/s, about 2 percent of the speed of light, so the non-relativistic formula is still accurate.

Can electric potential be negative?

Yes. Potential is measured against a reference, normally infinity. Near a negative charge the potential is below that reference, so it is negative. Only differences have physical meaning.

What is an equipotential surface?

It is a surface where the potential has the same value everywhere. For a point charge the equipotentials are spheres centred on the charge, and no work is done moving a charge along them. The field is always perpendicular to them.

How do you find the potential of two charges?

Add the potential of each charge, V = k qA / rA + k qB / rB, using the distance from each charge to the point. Because potential is a scalar there are no components. For opposite charges the total is zero at two points on the line through them.

How is the electric potential related to the electric field?

The field is the negative gradient of the potential, E = -dV/dr along the radial direction. For a point charge V = k q / r gives E = k q / r², which you can compare using the electric field calculator.