Electric Field Calculator

Find the electric field of point charges, lines and sheets, add fields by superposition, and see which way the field points.

🧲 Electric Field Calculator
Medium (not used by E = F/q)
Relative permittivity (εr)
Source charge (q)
Distance from the charge (r)
Test charge for the force (optional)
Charge A (qA)
Position of A (xA)
m
Charge B (qB)
Position of B (xB)
m
Field point (x)
m
Geometry
Linear charge density (λ)
Surface charge density (σ)
Distance from the line or sheet
Solve for
Force (F, signed along x)
Charge (q)
Electric field (E, signed along x)
Electric field |E|
—
Same field in V/m
—
Direction
—
Field in vacuum
—
Field at 2r
—
Field at r/2
—
Force on test charge
—

Net field E
—
Direction
—
Field from A
—
Field from B
—
Zero-field point
—

Electric field |E|
—
Same field in V/m
—
Direction
—
Formula used
—
Just outside a conductor
—

Electric field E
—
Field E
—
Field in V/m
—
Force F
—
Charge q
—
Force direction
—

🧲 What is the Electric Field?

The electric field is the region of influence around a charge, described at every point by the force a small positive test charge would feel there, divided by the size of that charge. Written E = F / q, it is measured in newtons per coulomb, which is the same unit as volts per metre. The idea, introduced by Michael Faraday, turns "action at a distance" into a local statement: the charges set up a field, and the field pushes on any other charge that happens to be present. Fields are vectors, so every value has a size and a direction.

Knowing the field is the first step in many problems. Students use it to find the force on a charge in a known field, engineers use it to check whether a field is strong enough to break down air (about 3 million V/m), and physicists use it to understand how charge distributions such as wires, charged rods and sheets behave. Detectors, ink-jet printers, mass spectrometers and cathode ray tubes all steer charged particles with electric fields. The same ideas explain why a lightning rod works and why sharp conductors concentrate the field.

This page works with four kinds of source. A single point charge has a field E = k q / r² that points away from a positive charge. Two point charges on a line add as signed numbers, and the calculator also finds the zero-field point. An infinite line of charge has a field that falls as 1/r, and an infinite sheet has a uniform field that does not change with distance. The definition E = F / q is included for converting between force, charge and field. Unlike the parallel plates calculator, which handles the uniform field between two plates held at a voltage, this page is about the fields of isolated charge distributions.

Remember that these formulas are idealisations. Real lines and sheets are finite, so the infinite results hold only close to the object compared with its size. A conductor changes the field around it, and a dielectric reduces the field of a free charge by its relative permittivity. For the force between charges see the Coulomb's law calculator, for the energy per charge see the electric potential calculator, and for symmetric charge distributions see the Gauss's law calculator.

📐 Formula

E  =  F / q  =  k |q| / ( εr r² )
E = electric field (N/C, same as V/m), pointing away from a positive source and toward a negative one
F = force on the test charge (N); q = test charge (C)
k = 1/(4πε0) = 8.9875517862 × 109 N m²/C², with ε0 = 8.8541878188 × 10-12 F/m (CODATA 2022)
r = distance from the point charge (m); εr = relative permittivity of the medium
Superposition: Enet = EA + EB, each signed along the line
Infinite line: E = λ / (2πε0εr r) = 2 k λ / (εr r), with λ in C/m
Infinite sheet: E = σ / (2ε0εr), with σ in C/m²; just outside a conductor E = σ / (ε0εr)
Example: q = 5 nC at r = 30 cm in vacuum gives E = 499.3 N/C

📖 How to Use This Calculator

Steps

1
Choose a mode. Point charge gives the field at a distance, Two charges adds two fields on a line, Line or sheet handles infinite distributions, and E = F/q solves for field, force or charge.
2
Enter the sources. Type charges with their unit (negative for a negative charge), distances or positions, and pick a medium or a relative permittivity. The unit menu only labels the number you type.
3
Read the field and the chart. The size of the field is shown in N/C and V/m with its direction. Two charges mode also reports the zero-field point, and every mode draws a chart with your value marked.

💡 Example Calculations

Example 1 — Field of a 5 nC Charge at 30 cm

q = +5 nC, r = 30 cm, vacuum

1
E = k q / r² = 8.98755 × 109 × 5 × 10-9 / 0.3²
2
E = 44.9378 / 0.09 = 499.3 N/C, pointing away from the charge
3
At twice the distance (60 cm) the field is a quarter, 124.8 N/C. At half the distance (15 cm) it is four times larger, 1.997 kN/C.
Field = 499.3 N/C (away from the charge)
Try this example →

Example 2 — The Field of a Proton at the Bohr Radius

q = +1 e (a proton), r = 52.9 pm (about the Bohr radius), vacuum

1
The field of the proton at that distance is E = k e / r² with e = 1.602177 × 10-19 C, entered here directly in units of e.
2
E = 8.98755 × 109 × 1.602177 × 10-19 / (52.9 × 10-12)² = 514.6 GN/C (5.146 × 1011 V/m)
3
This is far above the breakdown field of air, which is why atomic fields are so strong. The field points away from the proton, so it pulls an electron inward. A negative source would reverse the direction.
Field = 514.6 GN/C (away from the proton)
Try this example →

Example 3 — Zero-Field Point Between +4 µC and +1 µC

qA = +4 µC at x = 0, qB = +1 µC at x = 3 m, field point x = 2 m

1
EA = k qA / 2² = 8.98755 × 109 × 4 × 10-6 / 4 = +8.988 kN/C (toward +x)
2
EB = k qB / 1² = 8.98755 × 109 × 1 × 10-6 / 1 = -8.988 kN/C (toward -x)
3
The fields cancel exactly: x = 2 m is the zero-field point, where the distance ratio 2 to 1 matches the square root of the charge ratio 4 to 1.
Net field = 0 N/C at x = 2.000 m
Try this example →

Example 4 — Midpoint of an Electric Dipole

qA = +2 µC at x = 0, qB = -2 µC at x = 2 m, field point x = 1 m

1
EA = 8.98755 × 109 × 2 × 10-6 / 1² = +17.98 kN/C (away from +2 µC)
2
EB points toward the negative charge, which is also toward +x: +17.98 kN/C
3
Between opposite charges the fields add: 17.98 + 17.98 = 35.95 kN/C toward +x. There is no zero-field point on the line for equal and opposite charges.
Net field = 35.95 kN/C toward +x
Try this example →

Example 5 — A Long Charged Wire

λ = +2 µC/m, distance 0.5 m, vacuum

1
E = 2 k λ / r = 2 × 8.98755 × 109 × 2 × 10-6 / 0.5
2
E = 35950.2 / 0.5 = 71.90 kN/C, radially outward from the wire
3
At 1 m the field halves to 35.95 kN/C. This is the 1/r law of a line charge, valid when the point is close to the wire compared with its length.
Field = 71.90 kN/C (outward)
Try this example →

Example 6 — A Large Charged Sheet

σ = +5 µC/m², vacuum

1
E = σ / (2ε0) = 5 × 10-6 / (2 × 8.8541878188 × 10-12)
2
E = 282.4 kN/C, perpendicular to the sheet and away from it, at any distance
3
A conductor with the same surface charge density gives twice that just outside its surface, 564.7 kN/C, because the field inside the conductor is zero.
Field = 282.4 kN/C (away from the sheet)
Try this example →

Example 7 — Field from Force and Charge

A 2 µC test charge feels a force of 3 mN

1
E = F / q = 3 × 10-3 N / 2 × 10-6 C
2
E = 1500 N/C = 1.500 kN/C (also 1500 V/m)
3
The charge is positive, so the force points along the field.
Field = 1.500 kN/C
Try this example →

Example 8 — Force on a Negative Charge

E = +5 kN/C and q = -3 nC

1
F = q E = (-3 × 10-9 C) × (5 × 103 N/C)
2
F = -15.00 µN, with magnitude 15 µN
3
The negative sign means the force points opposite to the field, as it must for a negative charge.
Force = -15.00 µN (opposite to E)
Try this example →

❓ Frequently Asked Questions

What is the formula for the electric field?+
The electric field is the force per unit charge, E = F / q. For a point charge q the magnitude at distance r is E = k q / r², where k = 8.988e9 N m²/C². The field points away from a positive charge and toward a negative charge.
What are the units of electric field?+
The SI unit is newton per coulomb (N/C), which equals volt per metre (V/m). The calculator shows both labels for the same number, with an SI prefix such as kN/C or MN/C.
How do you find the electric field of a point charge?+
Use E = k |q| / r². For a 5 nC charge at 30 cm in vacuum, E = 8.988e9 x 5e-9 / 0.09 = 499.3 N/C, pointing away from the charge if it is positive. In a medium divide by the relative permittivity.
How do you find the electric field from two charges?+
Use superposition. Find the field of each charge at the point, give each a sign along the line (positive means toward +x), and add them. The calculator also finds where the combined field is zero.
What is the electric field of an infinite line of charge?+
E = lambda / (2 pi eps0 r) = 2 k lambda / r, where lambda is the charge per metre and r is the perpendicular distance. The field falls as 1/r and points radially outward for positive lambda. For lambda = 2 µC/m at 0.5 m it is about 71.90 kN/C.
What is the electric field of an infinite sheet of charge?+
E = sigma / (2 eps0) is uniform and independent of distance, pointing away from a positive sheet. For sigma = 5 µC/m² that is 282.4 kN/C. A conducting surface with the same sigma gives twice that, sigma / eps0, just outside.
Which direction does the electric field point?+
By convention the field points in the direction a positive test charge would be pushed. It points away from positive charges and toward negative charges. A negative charge in the field feels a force in the opposite direction.
How is this different from the parallel plates calculator?+
Parallel plates describe the near-uniform field between two plates held at a voltage, E = V / d, with capacitance and stored energy. This page covers the field of isolated charge distributions: point charges, line charges, sheets and superposition.
Where is the electric field zero between two charges?+
For two charges of the same sign it is zero between them where each field cancels the other. For +4 µC at x = 0 and +1 µC at x = 3 m it is zero at x = 2 m. For opposite signs it is zero outside the pair, beyond the smaller charge.
Does the medium change the electric field?+
Yes. In a uniform dielectric the field of a free charge is divided by the relative permittivity. In water (about 80) the field of a point charge is about 80 times smaller than in vacuum, while air is almost the same as vacuum.

What is the formula for the electric field?

The electric field is the force per unit charge, E = F / q. For a point charge q the magnitude at distance r is E = k q / r², where k = 8.988e9 N m²/C². The field points away from a positive charge and toward a negative charge.

What are the units of electric field?

The SI unit is newton per coulomb (N/C), which equals volt per metre (V/m). The calculator shows both labels for the same number, with an SI prefix such as kN/C or MN/C.

How do you find the electric field of a point charge?

Use E = k |q| / r². For a 5 nC charge at 30 cm in vacuum, E = 8.988e9 x 5e-9 / 0.09 = 499.3 N/C, pointing away from the charge if it is positive. In a medium divide by the relative permittivity.

How do you find the electric field from two charges?

Use superposition. Find the field of each charge at the point, give each a sign along the line (positive means toward +x), and add them. The calculator also finds where the combined field is zero.

What is the electric field of an infinite line of charge?

E = lambda / (2 pi eps0 r) = 2 k lambda / r, where lambda is the charge per metre and r is the perpendicular distance. The field falls as 1/r and points radially outward for positive lambda. For lambda = 2 µC/m at 0.5 m it is about 71.90 kN/C.

What is the electric field of an infinite sheet of charge?

E = sigma / (2 eps0) is uniform and independent of distance, pointing away from a positive sheet. For sigma = 5 µC/m² that is 282.4 kN/C. A conducting surface with the same sigma gives twice that, sigma / eps0, just outside.

Which direction does the electric field point?

By convention the field points in the direction a positive test charge would be pushed. It points away from positive charges and toward negative charges. A negative charge in the field feels a force in the opposite direction.

How is this different from the parallel plates calculator?

Parallel plates describe the near-uniform field between two plates held at a voltage, E = V / d, with capacitance and stored energy. This page covers the field of isolated charge distributions: point charges, line charges, sheets and superposition.

Where is the electric field zero between two charges?

For two charges of the same sign it is zero between them where each field cancels the other. For +4 µC at x = 0 and +1 µC at x = 3 m it is zero at x = 2 m. For opposite signs it is zero outside the pair, beyond the smaller charge.

Does the medium change the electric field?

Yes. In a uniform dielectric the field of a free charge is divided by the relative permittivity. In water (about 80) the field of a point charge is about 80 times smaller than in vacuum, while air is almost the same as vacuum.