Coulomb's Law Calculator
Find the electric force between point charges, solve for a missing charge or distance, and see how the medium and gravity compare.
⚡ What is Coulomb's Law?
Coulomb's law states that the electric force between two stationary point charges is proportional to the product of the charges and inversely proportional to the square of the distance between them. Charles-Augustin de Coulomb measured this behaviour with a torsion balance and published it in 1785. The force acts along the straight line joining the charges. Like charges repel, opposite charges attract, and by Newton's third law each charge feels a force of the same size. Everything in electrostatics, from the field of a point charge to the energy of a capacitor, builds on this one inverse square rule.
The law is used wherever charges interact at a distance. Physics students use it to find the force between charged spheres or ions, chemists use it to explain why ionic bonds are strong in air but weak in water, and engineers use it to estimate the force on dust, toner or droplets in electrostatic precipitators, printers and inkjets. Atomic physics begins with it too: the pull between the proton and electron in hydrogen is a Coulomb force. This page covers four jobs: the force between two charges, solving for any one missing quantity, the net force on a charge that sits between two others on a line, and a direct comparison with gravity.
A few points are easy to miss. The force depends on the medium, and the vacuum value is divided by the relative permittivity, so charges in water pull on each other roughly 80 times less than in vacuum. The law is for point charges or uniformly charged spheres, not arbitrary shapes. It also only covers charges at rest: moving charges add magnetic forces, which the Lorentz force calculator handles. Finally, the huge size of the Coulomb constant does not mean strong forces are common. A full coulomb is an enormous charge, and everyday objects carry nanocoulombs.
The chart in every mode helps with intuition. In the force and solve modes it plots force against distance on log-log axes, where an inverse square law is a straight line. In line mode it shows the net force along the whole line, with the singularities at each charge clipped. In gravity mode it plots both forces together, so you can see two parallel lines separated by dozens of orders of magnitude. For the field and potential of the same charges, see the electric field calculator and the electric potential calculator.
📐 Formula
📖 How to Use This Calculator
Steps
💡 Example Calculations
Example 1 — Two 1 µC Charges 10 cm Apart
q1 = q2 = +1 µC, r = 10 cm, vacuum
Example 2 — Opposite Charges in Water
q1 = +2 µC, q2 = -3 µC, r = 0.5 m, in water (εr = 80, illustrative)
Example 3 — How Far Apart for a 1 N Force?
Solve for distance: F = 1 N, q1 = q2 = 1 µC, vacuum
Example 4 — Finding an Unknown Charge
Solve for q1: F = 0.5 N attractive, q2 = -5 µC, r = 0.3 m, vacuum
Example 5 — Equilibrium Between Two Like Charges
qA = +9 µC at x = 0, qB = +1 µC at x = 1 m, test charge +1 µC at x = 0.75 m
Example 6 — Net Push From a Positive and a Negative Charge
qA = +4 µC at x = 0, qB = -1 µC at x = 1 m, test charge +1 µC at x = 0.5 m
Example 7 — Two Electrons 100 pm Apart
q1 = q2 = -1 e, m1 = m2 = 9.1093837139 × 10-31 kg, r = 100 pm
❓ Frequently Asked Questions
🔗 Related Calculators
What is Coulomb's law formula?
Coulomb's law gives the electric force between two point charges as F = k |q1 q2| / r², where k = 1/(4 pi eps0) is about 8.988e9 N m²/C², q1 and q2 are the charges in coulombs and r is the distance between them in metres. In a medium, divide by the relative permittivity.
How do I find the force between two charges?
Multiply the size of the two charges, divide by the square of the distance, then multiply by k = 8.988e9 N m²/C². For two 1 microcoulomb charges 10 cm apart in vacuum, F = 8.988e9 x 1e-12 / 0.01 = 0.8988 N, and the force is repulsive because the charges are alike.
Is the Coulomb force attractive or repulsive?
Like charges (both positive or both negative) repel and opposite charges attract. The calculator reports this from the sign of q1 times q2, while the size of the force uses the absolute values of the charges.
What is the value of the Coulomb constant k?
k = 1/(4 pi eps0) = 8.9875517862e9 N m²/C², using eps0 = 8.8541878188e-12 F/m from CODATA 2022. The commonly quoted value 8.99e9 or 9e9 is a rounded form of the same constant.
How does a dielectric medium change the Coulomb force?
The force is divided by the relative permittivity of the medium. In water (about 80) the force between two charges is about 80 times weaker than in vacuum, which is why salts dissolve into ions in water. Air is close to 1.0006, so air is nearly the same as vacuum.
How do I find the distance for a given force?
Rearrange to r = sqrt(k |q1 q2| / (eps_r F)). For two 1 microcoulomb charges in vacuum to push each other with exactly 1 N, r = sqrt(8.988e9 x 1e-12 / 1) = 0.0948 m, or 94.80 mm.
How do you find the force on a charge from two other charges?
Use superposition. Find the Coulomb force from each charge separately, give each a sign along the line (positive means toward +x), and add them. If the two forces are equal and opposite the net force is zero, which is an equilibrium point.
Why is the electric force so much bigger than gravity?
For an electron pair the electric force is about 4.2e42 times the gravitational force, because k e² is vastly larger than G m². Both fall as 1 over r squared, so the ratio does not change with distance. Gravity only dominates for large objects with almost no net charge.
Does Coulomb's law work for large charged objects?
It is exact for point charges and for uniformly charged spheres measured from their centre. For other shapes, or charged objects close together, the charge redistributes and you must integrate or use a field solver. This calculator treats every charge as a point.
What are the units of charge in Coulomb's law?
Use coulombs (C) in SI. Practical charges are small, so the unit menu includes mC, µC, nC and pC, and elementary charges e (1 e = 1.602176634e-19 C). The distance is converted to metres and the force is shown in newtons with an SI prefix.