Effective Nuclear Charge Calculator

Calculate effective nuclear charge Zeff using Slater's rules, from atomic number and the target electron's subshell group.

⚛️ Effective Nuclear Charge Calculator
Effective Nuclear Charge (Zeff)
—
Shielding Constant (S)
—
Target Group
—
Shielding Breakdown by Group
—

⚛️ What is Effective Nuclear Charge?

Effective nuclear charge (Zeff) is the net positive charge that a specific electron in a multi-electron atom actually experiences, after the shielding (screening) effect of all the other electrons is subtracted from the true nuclear charge. It is calculated as Zeff = Z - S, where Z is the atomic number and S is a shielding constant estimated using Slater's rules, a set of empirical rules published by physicist John C. Slater in 1930.

Slater's rules work by grouping electrons into shells based on how effectively they shield the electron of interest, using the grouping (1s)(2s,2p)(3s,3p)(3d)(4s,4p)(4d)(4f)(5s,5p)(5d)(5f)(6s,6p)(6d)(7s,7p). Electrons in the same group as the target electron shield weakly (0.35 each), electrons one shell closer to the nucleus shield more strongly (0.85 each), and electrons two or more shells closer shield almost completely (1.00 each). For a target electron in a d or f subshell, any electron in a lower group shields fully, reflecting how little d and f orbitals penetrate toward the nucleus.

Effective nuclear charge explains two of the most important periodic trends taught in general chemistry. Across a period, Zeff for the valence electron rises steadily because each added proton is only weakly shielded by the other same-shell electrons, which is why atomic radius shrinks and ionization energy rises left to right. Down a group, Zeff for the valence electron stays roughly constant because each new shell adds nearly a full proton's worth of inner shielding, which is why atomic radius grows and ionization energy falls top to bottom.

This calculator applies Slater's rules exactly as taught in general chemistry courses, building the ground-state electron configuration automatically from the atomic number and showing every group's contribution to the shielding constant, so you can see precisely where each part of S comes from.

📐 Formula

Zeff  =  Z − S
Zeff = effective nuclear charge felt by the target electron
Z = atomic number (actual nuclear charge)
S = shielding constant, from Slater's rules
Same group: 0.35 per other electron (0.30 for the 1s group)
n−1 shell (s/p target only): 0.85 per electron
n−2 shell and lower (s/p target): 1.00 per electron
Any lower group (d/f target): 1.00 per electron

📖 How to Use This Calculator

Steps

1
Enter the atomic number - enter Z, the atomic number of the element, between 1 and 118.
2
Choose the target subshell group - select which Slater shielding group the electron of interest belongs to, such as 3s,3p or 3d.
3
Click Calculate to see the effective nuclear charge Zeff, the shielding constant S, and a full group-by-group breakdown table.
4
Review the periodic trend chart to see how the valence electron's Zeff changes for nearby atomic numbers, illustrating the periodic trend.

💡 Example Calculations

Example 1 — Sodium's valence electron

Z = 11 (sodium), target group = 3s,3p. Configuration: 1s² 2s² 2p⁶ 3s¹.

1
Same group (3s,3p, 0 other electrons): 0 × 0.35 = 0.00
2
n−1 shell (2s,2p, 8 electrons): 8 × 0.85 = 6.80; n−2 shell (1s, 2 electrons): 2 × 1.00 = 2.00
3
S = 0.00 + 6.80 + 2.00 = 8.80; Zeff = 11 − 8.80 = 2.20
Effective nuclear charge on Na's lone 3s valence electron = 2.20.
Try this example →

Example 2 — Chlorine's valence electron

Z = 17 (chlorine), target group = 3s,3p. Configuration: 1s² 2s² 2p⁶ 3s² 3p⁵.

1
Same group (3s,3p, 6 other electrons out of 7): 6 × 0.35 = 2.10
2
n−1 shell (2s,2p, 8 electrons): 8 × 0.85 = 6.80; n−2 shell (1s, 2 electrons): 2 × 1.00 = 2.00
3
S = 2.10 + 6.80 + 2.00 = 10.90; Zeff = 17 − 10.90 = 6.10
Effective nuclear charge on a Cl 3p valence electron = 6.10, much higher than sodium's 2.20.
Try this example →

Example 3 — Iron's 3d electron

Z = 26 (iron), target group = 3d. Configuration: 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁶ 4s².

1
Same group (3d, 5 other electrons out of 6): 5 × 0.35 = 1.75
2
All lower groups (1s, 2s2p, 3s3p = 2 + 8 + 8 = 18 electrons, d target so all count at 1.00): 18 × 1.00 = 18.00
3
S = 1.75 + 18.00 = 19.75; Zeff = 26 − 19.75 = 6.25
Effective nuclear charge on an Fe 3d electron = 6.25. Note the outer 4s electrons contribute nothing, since they are not a lower group.
Try this example →

Example 4 — Oxygen's 2p electron

Z = 8 (oxygen), target group = 2s,2p. Configuration: 1s² 2s² 2p⁴.

1
Same group (2s,2p, 5 other electrons out of 6): 5 × 0.35 = 1.75
2
n−1 shell (1s, 2 electrons): 2 × 0.85 = 1.70
3
S = 1.75 + 1.70 = 3.45; Zeff = 8 − 3.45 = 4.55
Effective nuclear charge on an O 2p valence electron = 4.55.
Try this example →

❓ Frequently Asked Questions

What is effective nuclear charge (Zeff)?+
Effective nuclear charge (Zeff) is the net positive charge experienced by a particular electron in a multi-electron atom, after accounting for the shielding (screening) effect of the other electrons. It is calculated as Zeff = Z - S, where Z is the actual atomic number and S is the shielding constant estimated from Slater's rules.
What are Slater's rules?+
Slater's rules, developed by physicist John C. Slater in 1930, are a set of empirical rules for estimating the shielding constant S experienced by an electron in a multi-electron atom. Electrons are grouped into shielding groups (1s)(2s,2p)(3s,3p)(3d)(4s,4p)(4d)(4f)(5s,5p)... and each group of electrons contributes a different amount of shielding depending on its position relative to the electron being examined.
Why do electrons in the same group only shield by 0.35?+
Electrons occupying the same subshell group as the electron of interest are, on average, at a similar distance from the nucleus, so they only partially block the nuclear charge from reaching each other. Slater's rules assign 0.35 per same-group electron (0.30 specifically for the 1s group, since there is no lower shell to compare against).
Why is the shielding factor 0.85 for electrons one shell inward?+
Electrons in the shell immediately below the target electron (n-1) spend most of their time closer to the nucleus and are quite effective, but not perfectly effective, at blocking nuclear charge from the target electron, since there is still some orbital overlap. Slater's rules assign 0.85 per electron in this n-1 group.
Why do inner-shell electrons shield by a full 1.00?+
Electrons in shells two or more levels below the target electron (n-2 and lower) are, on average, so much closer to the nucleus that they effectively block the full charge of one proton each from reaching the target electron, so Slater's rules assign them a full shielding factor of 1.00 per electron.
How is shielding different for a target electron in a d or f subshell?+
For a target electron in an nd or nf subshell, Slater's rules treat every electron in any lower (more inner) group, including the s and p electrons of the same principal shell, as contributing a full 1.00 shielding factor, while electrons in outer groups contribute nothing. This reflects that d and f orbitals penetrate less toward the nucleus than s and p orbitals of the same shell.
Why does effective nuclear charge increase across a period?+
Moving left to right across a period, each new electron is added to the same outer shell (the same Slater shielding group), where it only shields the other valence electrons by 0.35 each, while the nuclear charge Z increases by a full unit each time. The net effect is that Zeff for the valence electron increases fairly steadily across the period, which is why atoms get smaller left to right.
Why does effective nuclear charge stay roughly constant down a group?+
Moving down a group, each new period adds a complete new shell of electrons, and the underlying core electrons shield the new valence electron almost as effectively (0.85 or 1.00 per electron) as the nuclear charge increases, so Zeff for the outermost electron changes only modestly down a group. This is why the atomic radius increases fairly smoothly down a group instead of shrinking.
Are Slater's rules exact?+
No. Slater's rules are a simplified empirical approximation, not an exact quantum mechanical calculation. They give reasonably accurate Zeff estimates for teaching periodic trends, but more precise effective nuclear charge values come from self-consistent field (Hartree-Fock or later) calculations, which account for orbital shapes and penetration more rigorously.
What is the difference between nuclear charge and effective nuclear charge?+
Nuclear charge (Z) is simply the number of protons in the nucleus, the same for every electron in the atom. Effective nuclear charge (Zeff) is smaller than Z and is specific to each individual electron, since it accounts for how much the other electrons in the atom shield that particular electron from the full nuclear charge.
How does effective nuclear charge relate to ionization energy?+
A higher effective nuclear charge on the valence electron means that electron is held more tightly, requiring more energy to remove, which raises ionization energy. This is why ionization energy generally increases across a period (as Zeff rises) and decreases down a group (as the valence electron moves further from the nucleus despite roughly constant Zeff).

What is effective nuclear charge (Zeff)?

Effective nuclear charge (Zeff) is the net positive charge experienced by a particular electron in a multi-electron atom, after accounting for the shielding (screening) effect of the other electrons. It is calculated as Zeff = Z - S, where Z is the actual atomic number and S is the shielding constant estimated from Slater's rules.

What are Slater's rules?

Slater's rules, developed by physicist John C. Slater in 1930, are a set of empirical rules for estimating the shielding constant S experienced by an electron in a multi-electron atom. Electrons are grouped into shielding groups (1s)(2s,2p)(3s,3p)(3d)(4s,4p)(4d)(4f)(5s,5p)... and each group of electrons contributes a different amount of shielding depending on its position relative to the electron being examined.

Why do electrons in the same group only shield by 0.35?

Electrons occupying the same subshell group as the electron of interest are, on average, at a similar distance from the nucleus, so they only partially block the nuclear charge from reaching each other. Slater's rules assign 0.35 per same-group electron (0.30 specifically for the 1s group, since there is no lower shell to compare against).

Why is the shielding factor 0.85 for electrons one shell inward?

Electrons in the shell immediately below the target electron (n-1) spend most of their time closer to the nucleus and are quite effective, but not perfectly effective, at blocking nuclear charge from the target electron, since there is still some orbital overlap. Slater's rules assign 0.85 per electron in this n-1 group.

Why do inner-shell electrons shield by a full 1.00?

Electrons in shells two or more levels below the target electron (n-2 and lower) are, on average, so much closer to the nucleus that they effectively block the full charge of one proton each from reaching the target electron, so Slater's rules assign them a full shielding factor of 1.00 per electron.

How is shielding different for a target electron in a d or f subshell?

For a target electron in an nd or nf subshell, Slater's rules treat every electron in any lower (more inner) group, including the s and p electrons of the same principal shell, as contributing a full 1.00 shielding factor, while electrons in outer groups contribute nothing. This reflects that d and f orbitals penetrate less toward the nucleus than s and p orbitals of the same shell.

Why does effective nuclear charge increase across a period?

Moving left to right across a period, each new electron is added to the same outer shell (the same Slater shielding group), where it only shields the other valence electrons by 0.35 each, while the nuclear charge Z increases by a full unit each time. The net effect is that Zeff for the valence electron increases fairly steadily across the period, which is why atoms get smaller left to right.

Why does effective nuclear charge stay roughly constant down a group?

Moving down a group, each new period adds a complete new shell of electrons, and the underlying core electrons shield the new valence electron almost as effectively (0.85 or 1.00 per electron) as the nuclear charge increases, so Zeff for the outermost electron changes only modestly down a group. This is why the atomic radius increases fairly smoothly down a group instead of shrinking.

Are Slater's rules exact?

No. Slater's rules are a simplified empirical approximation, not an exact quantum mechanical calculation. They give reasonably accurate Zeff estimates for teaching periodic trends, but more precise effective nuclear charge values come from self-consistent field (Hartree-Fock or later) calculations, which account for orbital shapes and penetration more rigorously.

What is the difference between nuclear charge and effective nuclear charge?

Nuclear charge (Z) is simply the number of protons in the nucleus, the same for every electron in the atom. Effective nuclear charge (Zeff) is smaller than Z and is specific to each individual electron, since it accounts for how much the other electrons in the atom shield that particular electron from the full nuclear charge.

How does effective nuclear charge relate to ionization energy?

A higher effective nuclear charge on the valence electron means that electron is held more tightly, requiring more energy to remove, which raises ionization energy. This is why ionization energy generally increases across a period (as Zeff rises) and decreases down a group (as the valence electron moves further from the nucleus despite roughly constant Zeff).