Dividend Discount Model Calculator

Value a dividend-paying stock using the Gordon Growth Model, Zero Growth DDM, or Two-Stage DDM. Enter current dividend, growth rate, and required return for instant results.

💰 Dividend Discount Model Calculator
Current Annual Dividend (D0)2.00
$
$0$50
Dividend Growth Rate (g)5
%
0%20%
Required Return (r)10
%
1%30%
Annual Dividend (D)4.00
$
$0.01$50
Required Return (r)8
%
1%30%
Current Annual Dividend (D0)1.50
$
$0.01$50
High-Growth Rate (g1)15
%
0%50%
High-Growth Period (n)5
yrs
1 yr20 yrs
Terminal Growth Rate (g2)4
%
0%15%
Required Return (r)10
%
1%30%
Intrinsic Value (P0)
—
Next Dividend (D1)
—
Dividend Yield
—
Capital Gain Yield
—
Intrinsic Value (P0)
—
Dividend Yield
—
Years to Payback
—
Intrinsic Value (P0)
—
PV of Stage 1 Dividends
—
Terminal Value
—
PV of Terminal Value
—
Stage 1 Share of Value
—

💰 What is the Dividend Discount Model?

The Dividend Discount Model (DDM) is a stock valuation method that estimates the intrinsic value of a share as the present value of all its expected future dividends. It is based on the principle that the value of any asset equals the present value of its future cash flows, and for a dividend-paying stock, those cash flows are the dividends received by the shareholder. The model was formalized by Myron Gordon in the 1950s and remains one of the foundational tools in equity valuation.

The DDM is used in three primary contexts. Equity analysts at investment banks and asset management firms use it to derive fair value estimates for mature dividend-paying companies in sectors like utilities, consumer staples, and financials. Portfolio managers use it to compare a stock's intrinsic value against its market price to identify overvalued or undervalued securities. Corporate finance teams use DDM logic to estimate the cost of equity capital as part of WACC calculations, where the cost of equity is derived from the relationship r = D1/P0 + g.

There are three common DDM variants. The Gordon Growth Model assumes dividends grow at a constant rate forever and is appropriate for mature, stable companies. The Zero Growth Model treats dividends as a fixed perpetuity and is the standard formula for preferred stock valuation. The Two-Stage DDM recognizes that companies often have a high-growth phase followed by stable long-run growth, computing the value as the sum of discounted dividends during the growth phase and a terminal value at the stable growth rate.

The DDM is sensitive to its inputs: a 1% change in the growth rate or required return can shift the estimated fair value by 20 to 50%. This sensitivity is both a strength (it forces explicit assumptions about long-term growth) and a limitation (small estimation errors compound significantly). The model is least reliable for non-dividend-paying growth stocks and most reliable for large-cap, regulated industries with long dividend histories and predictable cash flows.

📐 Formulas

Gordon Growth Model    P0  =  D1 ÷ (r − g)  =  D0(1+g) ÷ (r − g)
P0 = intrinsic value (fair price per share today)
D0 = most recently paid annual dividend per share
D1 = next year's expected dividend = D0 × (1 + g)
g = constant dividend growth rate (must be less than r)
r = required rate of return (discount rate)
Dividend yield = D1 / P0 = r − g
Example: D0 = $2, g = 5%, r = 10%: D1 = $2.10; P0 = $2.10 / 0.05 = $42.00
Zero Growth DDM    P0  =  D ÷ r
D = constant annual dividend (perpetuity)
r = required rate of return
Example: Preferred stock with D = $4, r = 8%: P0 = $4 / 0.08 = $50.00
Two-Stage DDM    P0  =  Σ [Dt ÷ (1+r)t] + TV ÷ (1+r)n
Dt = dividend in year t during high-growth phase = D0 × (1+g1)t
TV = terminal value at year n = Dn+1 / (r − g2)
g1 = high-growth rate during years 1 to n
g2 = stable terminal growth rate (must be less than r)
n = number of high-growth years
Example: D0 = $1.50, g1 = 15%, n = 5, g2 = 4%, r = 10%: Intrinsic value = $44.06

📖 How to Use This Calculator

Steps

1
Select the DDM variant - Choose Gordon Growth Model for constant-growth stocks, Zero Growth for preferred stocks or no-growth firms, or Two-Stage DDM for stocks with a temporary high-growth phase before settling into long-run stable growth.
2
Enter the current dividend - Enter the most recently paid annual dividend per share (D0). For quarterly-paying stocks, multiply the most recent quarterly dividend by 4 to get the annual amount.
3
Enter growth and return rates - Enter the expected dividend growth rate and your required rate of return as percentages. For Two-Stage, also enter the high-growth period length and the terminal long-run growth rate, which must be less than the required return.
4
Click Calculate - Press Calculate to see the intrinsic stock value, next year's expected dividend, dividend yield, capital gain yield, and (for Two-Stage) a breakdown of stage 1 PV versus terminal value PV.

💡 Example Calculations

Example 1 - Gordon Growth Model: Utility Stock

A utility company paid a $3.00 annual dividend last year. Dividends are growing at 4% per year. Required return is 9%. Find the intrinsic value.

1
D1 = D0 × (1 + g) = $3.00 × 1.04 = $3.12.
2
P0 = D1 / (r − g) = $3.12 / (0.09 − 0.04) = $3.12 / 0.05 = $62.40.
3
Dividend yield = D1 / P0 = $3.12 / $62.40 = 5%. Capital gain yield = g = 4%. Total return = 5% + 4% = 9% = required return.
Intrinsic Value = $62.40 | D1 = $3.12 | Dividend Yield = 5.00%
Try this example →

Example 2 - Zero Growth DDM: Preferred Stock

A preferred stock pays a fixed annual dividend of $5.00 per share. An investor requires an 8% return. Find the fair value.

1
Since dividends are fixed (no growth), P0 = D / r = $5.00 / 0.08 = $62.50.
2
At this price the dividend yield equals the required return: $5.00 / $62.50 = 8.00%.
3
Payback period = 1 / r = 1 / 0.08 = 12.5 years (years of dividends to recover the purchase price, ignoring time value).
Intrinsic Value = $62.50 | Dividend Yield = 8.00% | Payback = 12.5 years
Try this example →

Example 3 - Two-Stage DDM: Tech Company Transitioning to Maturity

A tech company paid a $1.00 dividend last year. It is expected to grow dividends at 20% for 5 years, then settle to 4% perpetually. Required return is 11%.

1
Stage 1 dividends: Year 1: $1.20, Year 2: $1.44, Year 3: $1.73, Year 4: $2.07, Year 5: $2.49. PV at 11%: $1.08 + $1.17 + $1.26 + $1.36 + $1.47 = $6.34.
2
Terminal value at year 5: D6 = $2.49 × 1.04 = $2.59. TV = $2.59 / (0.11 − 0.04) = $2.59 / 0.07 = $37.00.
3
PV of terminal value = $37.00 / (1.11)5 = $37.00 / 1.685 = $21.96. Total = $6.34 + $21.96 = $28.30.
Intrinsic Value = $28.30 | PV Stage 1 = $6.34 | PV Terminal = $21.96
Try this example →

Example 4 - Gordon Growth: Effect of Required Return Change

A consumer staples stock: D0 = $2.50, g = 5%. Compare intrinsic value at r = 8% vs r = 10%.

1
D1 = $2.50 × 1.05 = $2.625 for both cases.
2
At r = 8%: P0 = $2.625 / (0.08 − 0.05) = $2.625 / 0.03 = $87.50.
3
At r = 10%: P0 = $2.625 / (0.10 − 0.05) = $2.625 / 0.05 = $52.50. A 2% rise in required return cuts fair value by 40%, illustrating the model's sensitivity.
At r = 8%: P0 = $87.50 | At r = 10%: P0 = $52.50
Try this example →

❓ Frequently Asked Questions

What is the Dividend Discount Model formula?+
The Gordon Growth DDM formula is P0 = D1 / (r minus g), where D1 is next year's expected dividend (D0 times (1+g)), r is the required rate of return, and g is the constant dividend growth rate. Constraint: r must be greater than g. For D0 = $2, g = 5%, r = 10%: D1 = $2.10; P0 = $2.10 / 0.05 = $42.00. The dividend yield equals r minus g = 5%, and capital gain yield equals g = 5%.
What is the difference between D0 and D1 in the DDM?+
D0 is the dividend that was most recently paid (the trailing dividend). D1 is the next dividend expected to be paid, calculated as D0 times (1 + g). The Gordon Growth Model uses D1 in the numerator because a new buyer of the stock will receive the next dividend, not the one that was just paid. If D0 = $2.00 and g = 5%, then D1 = $2.10, which is the first dividend the new shareholder receives.
What required return should I use in the Dividend Discount Model?+
The required return r is typically estimated using CAPM: r = risk-free rate + beta times equity risk premium. For a US stock with beta 1.0, a 4% risk-free rate, and 5% equity risk premium, r = 9%. For a higher-risk stock with beta 1.5, r = 4% + 1.5 times 5% = 11.5%. Some analysts use the company's weighted average cost of capital. The required return must strictly exceed the dividend growth rate for the Gordon Growth Model to produce a positive finite price.
When should I use the Two-Stage DDM instead of the Gordon Growth Model?+
Use the Two-Stage DDM when a company has a temporary high-growth phase before settling into stable long-run growth. For example, a company growing dividends at 15% per year for 5 years and then 4% permanently. The Gordon Growth Model requires constant growth forever, which is only realistic for mature, stable companies. If the current growth rate is close to or above the required return, the Gordon Growth Model is not applicable and the Two-Stage DDM is necessary.
What is the Zero Growth DDM used for?+
The Zero Growth DDM (P0 = D / r) values a stock that pays a constant, non-growing dividend forever. It is the standard valuation formula for preferred stocks, where dividends are fixed by the terms of issuance. It also applies to mature businesses operating in declining industries where no growth is expected. For a preferred stock paying $4.00 per year with r = 8%: fair value = $4.00 / 0.08 = $50.00. The implied payback period without time value = 1 / r = 12.5 years.
What is dividend yield in the Gordon Growth Model?+
In the Gordon Growth Model, dividend yield = D1 / P0 = r minus g. Because P0 = D1 / (r minus g), rearranging gives D1 / P0 = r minus g. The total return to shareholders (r) equals dividend yield (r minus g) plus the capital gain yield (g). This means at fair value, the total return exactly equals the required return. If the market price is below the intrinsic value, the implied total return exceeds r, making the stock undervalued.
What happens when the growth rate equals the required return in the DDM?+
When g equals r, the denominator of the Gordon Growth Model (r minus g) equals zero, making the formula undefined (price goes to infinity). This represents a theoretical boundary: if a stock's dividends grow as fast as the required return forever, there is no finite fair price because each future dividend, when discounted back, retains its full nominal value. In practice, g cannot exceed r for any sustained period for a mature economy, since eventually dividend growth is bounded by long-run nominal GDP growth.
How sensitive is the DDM to changes in inputs?+
The DDM is highly sensitive to the spread (r minus g). For D1 = $2, r = 10%, g = 5%: P0 = $40. If g increases by 1% to 6% (spread narrows from 5% to 4%): P0 = $2 / 0.04 = $50, a 25% increase. If r increases by 1% to 11% (spread widens from 5% to 6%): P0 = $2 / 0.06 = $33, a 17.5% decrease. Small estimation errors in long-run growth or discount rates create large valuation errors, which is the main practical limitation of the model.
What is the terminal value in a Two-Stage DDM?+
The terminal value (TV) in a Two-Stage DDM is the intrinsic value of the stock at the end of the high-growth period, estimated using the Gordon Growth Model: TV = D(n+1) / (r minus g2). This represents the price a buyer at year n would pay for the stock as it enters stable growth. It is then discounted to the present: PV(TV) = TV / (1 + r)^n. Terminal value typically accounts for 60 to 80% of total intrinsic value for a typical stock.
What types of stocks is the DDM most and least reliable for?+
The DDM is most reliable for mature, regulated industries with long dividend histories and stable payouts: utilities, large-cap consumer staples, REITs, and financial institutions. It is least reliable for non-dividend-paying growth stocks (no cash flows to discount), cyclical companies with erratic dividends, and early-stage businesses. For non-dividend payers, analysts use DCF with free cash flow instead of dividends, which is mathematically identical in structure but uses cash flow rather than dividends as the numerator.
How does the DDM relate to the Gordon Growth Model perpetuity?+
The Gordon Growth Model is mathematically equivalent to a growing perpetuity. The present value of a cash flow C growing at rate g, discounted at rate r, is PV = C / (r minus g). The DDM applies this formula to dividends: PV = D1 / (r minus g). This formula appears in the Present Value of Growing Perpetuity section of time-value-of-money textbooks. The Zero Growth DDM (P = D/r) is a special case where g = 0, the standard perpetuity formula.
Can I use the DDM to find the implied required return from a stock price?+
Yes. Rearranging the Gordon Growth Model: r = D1 / P0 + g. This is the implied required return (cost of equity) given the current market price. For a stock at $50 with D1 = $2.50 and g = 4%: r = $2.50 / $50 + 0.04 = 0.05 + 0.04 = 9%. This is called the dividend yield plus growth approach to estimating the cost of equity and is an alternative to CAPM. It is commonly used in regulated utility rate cases to determine a fair allowed return.
Tags: Dividend Discount Model Calculator DDM Calculator Gordon Growth Model Calculator Stock Intrinsic Value Calculator Dividend Valuation Model Calculator Formula Free Online

🔗 Related Calculators

📈
Discount Rate Calculator
Finance - Investment
📈
Present Value Calculator
Finance - Investment
📈
NPV Calculator
Finance - Investment
📈
DCF Calculator
Finance - Investment
📈
Investment Calculator
Finance - Investment

What is the Dividend Discount Model formula?

The Gordon Growth Model DDM formula is P0 = D1 / (r - g), where D1 is next year's expected dividend (D1 = D0 times (1+g)), r is the required rate of return, and g is the constant dividend growth rate. For a stock paying a current dividend of $2 with 5% growth and 10% required return: D1 = $2.10, P0 = $2.10 / (0.10 - 0.05) = $42.

What is the difference between D0 and D1 in the DDM?

D0 is the most recently paid dividend (the dividend that has already been paid). D1 is the next expected dividend, calculated as D1 = D0 times (1 + g). The Gordon Growth Model formula uses D1 in the numerator because it represents the first dividend received by a new buyer of the stock.

What required return should I use in the Dividend Discount Model?

The required return r is typically estimated using CAPM: r = risk-free rate + beta times equity risk premium. For a large US company with beta 1.0, a 4% risk-free rate, and 5% equity risk premium, r = 9%. For higher-risk stocks with beta 1.5, r = 4% + 1.5 times 5% = 11.5%. The required return must always exceed the dividend growth rate for the Gordon Growth Model to produce a valid positive price.

When should I use the Two-Stage DDM instead of the Gordon Growth Model?

Use the Two-Stage DDM when a company has a temporary high-growth phase before settling into a stable long-term growth rate. For example, a company growing dividends at 15% per year for 5 years and then 4% per year permanently. The Gordon Growth Model assumes constant growth forever, so it is only valid for mature companies whose dividend growth is already stable.

What does the Zero Growth DDM measure?

The Zero Growth DDM (P = D / r) calculates the present value of a perpetuity: a constant dividend paid forever. It is the standard valuation formula for preferred stocks, where dividends are fixed by contract. For a preferred stock paying a $4 annual dividend with a required return of 8%: P = $4 / 0.08 = $50.

What is dividend yield in the Gordon Growth Model?

In the Gordon Growth Model, dividend yield = D1 / P0 = r - g. Because P0 = D1 / (r - g), the dividend yield always equals the difference between the required return and the growth rate. For r = 10% and g = 5%, dividend yield = 5%. The remaining 5% of total return comes from capital gains as the stock price grows at rate g.

What are the limitations of the Dividend Discount Model?

The DDM has three main limitations. First, it only works for dividend-paying stocks; companies that pay no dividends cannot be valued this way. Second, the model is highly sensitive to small changes in the growth rate and required return inputs; a 1% change in g or r can shift the fair value by 20 to 50%. Third, estimating long-term dividend growth rates accurately is difficult, and using an inappropriate rate produces unreliable valuations.

How does the Two-Stage DDM calculate terminal value?

In the Two-Stage DDM, the terminal value at year n is calculated using the Gordon Growth Model applied to the first dividend of the stable-growth phase: TV = D(n+1) / (r - g2), where D(n+1) = Dn times (1 + g2). This terminal value is then discounted back to the present: PV(TV) = TV / (1 + r)^n. The total intrinsic value is PV of all Stage 1 dividends plus PV of terminal value.

📌 Quick Tips

💡The Gordon Growth Model only works when the required return r is strictly greater than the growth rate g. If your stock grows faster than your required return, use the Two-Stage DDM with a terminal growth rate below r.
💡For the required return (r), use the Capital Asset Pricing Model: r = risk-free rate + beta times equity risk premium. A typical US equity might use r = 4% + 1.0 times 5% = 9% with a 4% risk-free rate and 5% ERP.
💡The DDM works best for mature dividend-paying companies with stable, predictable growth. It is less reliable for growth stocks that pay no dividends, cyclical companies, or firms with erratic payout ratios.
💡Zero Growth DDM (P = D/r) is the standard valuation formula for preferred stocks, where dividends are fixed by contract. It is also equivalent to a perpetuity: the present value of a constant cash flow forever.
💡In the Two-Stage DDM, the terminal value typically represents 60 to 80 percent of the total intrinsic value for a typical stock. If the terminal value is above 90%, your inputs may not be realistic.